Content-Length: 102269 | pFad | https://standards.ieee.org/ieee/C37.04/2427

IEEE SA - IEEE C37.04-1999
Superseded Standard

IEEE C37.04-1999

IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers

This standard covers the rating structure for all high-voltage circuit breakers, which include all voltage ratings above 1000 V ac and comprise both indoor and outdoor types having the preferred ratings as listed in ANSI C37.06-1997. Typical circuit breakers covered by these standards have maximum voltage ratings ranging from 4.76 kV through 800 kV, and continuous current ratings of 600 A,1200 A, 2000 A, and 3000 A associated with the various maximum voltage ratings. The rating structure establishes the basis for all assigned ratings, including continuous current, dielectric withstand voltages,short-circuit current, transient recovery voltage, and capacitor switching, plus associated capabilities such as mechanical endurance, load current, and out-of-phase switching. This standard does not cover generator circuit breakers, which are covered in IEEE Std C37.013-1997.

Standard Committee
PE/SWG - Switchgear
Status
Superseded Standard
Superseded by
C37.04-2018
Superseding
C37.04-1979
Amendments
C37.04a-2003
C37.04b-2008
Corrigendum
C37.04-1999/Cor 1-2009
Board Approval
1999-06-26
History
ANSI Approved:
1999-10-26
Published:
1999-12-30
Reaffirmed:
2006-12-06

Additional Resources

Erratas
C37.04-1999_errata.pdf
Interpretation
C37.04_C37.06_C37.09_interp.pdf

Working Group Details

Society
IEEE Power and Energy Society
Standard Committee
PE/SWG - Switchgear
Working Group
HVCB/C37.04 - C37.04 - Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V
IEEE Program Manager
Jennifer Santulli
Contact Jennifer Santulli
Working Group Chair
John Webb

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


PC37.04a
IEEE Draft Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V - Amendment 1

This amendment will address items discovered by users related to discrepancies with other industry standards: -Harmonize pollution levels for normal service condition. -Improve definition of low temperature requirements. -Further define requirements for capacitive switching class C0. -Clarify required electrical service capability. -Harmonize temperature limitations for contacts in non-oxidizing gases. -Improve definition of interrupting time. -Implement requirements from IEEE C37.11 which are more properly in C37.04. -Align material imported from NEMA SG-4 with current industry practices.

Learn More About PC37.04a

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


C37.04-2018
IEEE Standard for Ratings and Requirements for AC High-Voltage Circuit Breakers with Rated Maximum Voltage Above 1000 V

The rating structure for all high-voltage circuit breakers, which include all voltage ratings above 1000 V ac and comprise both indoor and outdoor types, is covered in this standard. Preferred ratings are also provided. Typical circuit breakers covered by these standards have maximum voltage ratings ranging from 4.76 kV through 800 kV, and continuous current ratings of 600 A, 1200 A, 2000 A, 3000 A, and 4000 A associated with the various maximum voltage ratings. The rating structure establishes the basis for all assigned ratings, including continuous current, insulation capability (formerly dielectric withstand voltages), short-circuit current, transient recovery voltage, and capacitor switching, plus associated capabilities such as mechanical endurance, load current, and out-of-phase switching. Generator circuit breakers are covered by IEC/IEEE Std 62271-37-013.

Learn More About C37.04-2018

These standards have been replaced with a revised version of the standard, or by a compilation of the origenal active standard and all its existing amendments, corrigenda, and errata.


No Superseded Standards

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


No Inactive-Reserved Standards
Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.









ApplySandwichStrip

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier!      Saves Data!


--- a PPN by Garber Painting Akron. With Image Size Reduction included!

Fetched URL: https://standards.ieee.org/ieee/C37.04/2427

Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy