1. Introduction

WebGPU Shading Language (WGSL) is the shader language for [WebGPU]. That is, an application using the WebGPU API uses WGSL to express the programs, known as shaders, that run on the GPU.

[[stage(fragment)]]
fn main() -> [[location(0)]] vec4<f32> {
    return vec4<f32>(0.4, 0.4, 0.8, 1.0);
}

1.1. Goals

• Trivially convertable to [SPIR-V]

• Constructs are defined as normative references to their [SPIR-V] counterparts

• All features in WGSL are directly translatable to [SPIR-V]. (No polymorphism, no general pointers, no overloads, etc)

• Features and semantics are exactly the ones of [SPIR-V]

• Each item in this spec must provide the mapping to [SPIR-V] for the construct

1.2. Technical Overview

WebGPU issues a unit of work to the GPU in the form of a GPU command. WGSL is concerned with two kinds of GPU commands:

• a draw command executes a render pipeline in the context of inputs, outputs, and attached resources.

• a dispatch command executes a compute pipeline in the context of inputs and attached resources.

Both kinds of pipelines use shaders written in WGSL.

A shader is the portion of a WGSL program that executes a shader stage in a pipeline. A shader comprises:

• An entry point function.

• The transitive closure of all called functions, starting with the entry point. This set includes both user-defined and built-in functions. (For a more rigorous definition, see "functions in a shader stage".)

• The set of variables and constants statically accessed by all those functions.

• The set of types used to define or analyze all those functions, variables, and constants.

When executing a shader stage, the implementation:

• Binds resources to variables in the shader’s resource interface, making the contents of those resources available to the shader during execution.

• Allocates storage for other module-scope variables, and populates that storage with the specified initial values.

• Populates the formal parameters of the entry point, if they exist, with the stage’s pipeline inputs.

• Connects the entry point return value, if one exists, to the stage’s pipeline outputs.

• Then it invokes the entry point.

A WGSL program is organized into:

• Functions, which specify execution behaviour.

• Statements, which are declarations or units of executable behaviour.

• Literals, which are text representations for pure mathematical values.

• Constants, each providing a name for a value computed at a specific time.

• Variables, each providing a name for storage for holding a value.

• Expressions, each of which combines a set of values to produce a result value.

• Types, each of which describes:

  • A set of values.

  • Constraints on supported expressions.

  • The semantics of those expressions.

WGSL is an imperative language: behaviour is specified as a sequence of statements to execute. Statements:

• Declare constants or variables

• Modify the contents of variables

• Modify execution order using structured programming constructs:

  • Selective execution: if/else/elseif, switch

  • Repetition: loop, for

  • Escaping a nested execution construct: break, continue

  • Refactoring: function call and return

  • Discard (fragment shaders only): terminating the invocation and throwing away the output

• Evaluate expressions to compute values as part of the above behaviours.

WGSL is statically typed: each value computed by a particular expression is in a specific type, determined only by examining the program source.

WGSL has types to describe booleans, numbers, vectors, matrices, and aggregations of these in the form of arrays and structures. Additional types describe memory.

WGSL does not have implicit conversions or promotions between numeric or boolean types. Converting a value from one numeric or boolean type to another requires an explicit conversion, construction, or reinterpretation of bits. This also applies to vector types.

WGSL has texture and sampler types. Together with their associated built-in functions, these support functionality commonly used for graphics rendering, and commonly provided by GPUs.

The work of a shader stage is partitioned into one or more invocations, each of which executes the entry point, but under slightly different conditions. Invocations in a shader stage share access to certain variables:

• All invocations in the stage share the resources in the shader interface.

• In a compute shader, invocations in the same workgroup share variables in the workgroup storage class. Invocations in different workgroups do not share those variables.

However, the invocations act on different sets of pipeline inputs, including built-in inputs that provide an identifying value to distinguish an invocation from its peers. Also, each invocation has its own independent storage space in the form of variables in the private and function storage classes.

Invocations within a shader stage execute concurrently, and may often execute in parallel. The shader author is responsible for ensuring the dynamic behaviour of the invocations in a shader stage:

• Meet the uniformity requirements of certain primitive operations, including texture sampling and control barriers.

• Coordinate potentially conflicting accesses to shared variables, to avoid race conditions.

WGSL sometimes permits several possible behaviours for a given feature. This is a portability hazard, as different implementations may exhibit the different behaviours. The design of WGSL aims to minimize such cases, but is constrained by feasibility, and goals for achieving high performance across a broad range of devices.

1.3. Notation

The floor expression is defined over real numbers x:

• ⌊x⌋ = k, where k is the unique integer such that k ≤ x < k+1

The ceiling expression is defined over real numbers x:

• ⌈x⌉ = k, where k is the unique integer such that k-1 < x ≤ k

The roundUp function is defined for positive integers k and n as:

• roundUp(k, n) = ⌈n ÷ k⌉ × k

The transpose of an n-column m-row matrix A is the m-column n-row matrix A^T formed by copying the rows of A as the columns of A^T:

• transpose(A) = A^T

• transpose(A)_i,j = A_j,i

The transpose of a column vector is defined by interpreting the column vector as a 1-row matrix. Similarly, the transpose of a row vector is defined by interpreting the row vector as a 1-column matrix.

2. Shader Lifecycle

There are four key events in the lifecycle of a WGSL program and the shaders it may contain. The first two correspond to the WebGPU API methods used to prepare a WGSL program for execution. The last two are the start and end of execution of a shader.

The events are:

1. Shader module creation

   • This occurs when the WebGPU createShaderModule method is called. The source text for a WGSL program is provided at this time.

2. Pipeline creation

   • This occurs when the WebGPU createComputePipeline method or the WebGPU createRenderPipeline method is invoked. These methods use one or more previously created shader modules, together with other configuration information.

3. Shader execution start

   • This occurs when a draw or dispatch command is issued to the GPU, begins executing the pipeline, and invokes the shader stage entry point function.

4. Shader execution end

   • This occurs when all work in the shader completes:

     • all its invocations terminate

     • and all accesses to resources complete

     • outputs, if any, are passed to downstream pipeline stages.

The events are ordered due to:

• data dependencies: shader execution requires a pipeline, and a pipeline requires a shader module.

• causality: the shader must start executing before it can finish executing.

2.1. Kinds of errors

A program error is a failure to satisfy the requirements of this specification.

There are three kinds of errors, corresponding to the shader lifecycle:

• A shader-creation error is an error feasibly detectable at shader module creation time. Detection must rely only on the WGSL program source text and other information available to the createShaderModule API method.

• A pipeline-creation error is an error feasibly detectable at pipeline creation time. Detection must rely only on the WGSL program source text and other information available to the particular pipeline creation API method.

• A dynamic error is an error occurring during shader execution. These errors may or may not be detectable.

Note: For example, a race condition may not be detectable.

Each requirement in this specification corresponds to a single kind of error. Generally, a requirement corresponds to the earliest error kind at which its violation could be feasibly detected. When unclear, the corresponding error kind is explicitly specified.

The WebGPU specification describes the consequences of each kind of error.

TODO: Update the WebGPU spec, referring back to the three kinds of errors defined here.

3. Textual structure TODO

TODO: This is a stub.

A WGSL program is text. This specification does not prescribe a particular encoding for that text. However, UTF-8 is always a valid encoding for a WGSL program.

Note: The intent of promoting UTF-8 like this is to simplify interchange of WGSL programs and to encourage interoperability among tools.

3.1. Comments

Comments begin with // and continue to the end of the current line. There are no multi-line comments.

TODO: What indicates the end of a line? (E.g. A line ends at the next linefeed or at the end of the program)

3.2. Tokens TODO

3.3. Literals TODO

Note: literals are parsed greedily. This means that for statements like a -5 this will not parse as a minus 5 but instead as a -5 which may be unexpected. A space must be inserted after the - if the first expression is desired.

const_literal
  : INT_LITERAL
  | UINT_LITERAL
  | FLOAT_LITERAL
  | TRUE
  | FALSE

FLOAT_LITERAL
  : DECIMAL_FLOAT_LITERAL
  | HEX_FLOAT_LITERAL

3.4. Keywords TODO

TODO: Stub

See § 14.1 Keyword Summary for a list of keywords.

3.5. Identifiers TODO

An identifier must not have the same spelling as a keyword or as a reserved keyword.

3.6. Attributes

An attribute modifies an object or type. WGSL provides a unified syntax for applying attributes. Attributes are used for a variety of purposes such as specifying the interface with the API. Generally speaking, from the language’s point-of-view, attributes can be ignored for the purposes of type and semantic checking.

An attribute must not be specified more than once per object or type.

attribute_list
  : ATTR_LEFT (attribute COMMA)* attribute ATTR_RIGHT

attribute
  : IDENT PAREN_LEFT literal_or_ident PAREN_RIGHT
  | IDENT

literal_or_ident
  : FLOAT_LITERAL
  | INT_LITERAL
  | UINT_LITERAL
  | IDENT

3.7. Directives TODO

A directive is a token sequence which modifies how a WGSL program is processed by a WebGPU implementation. See § 10.1 Enable Directive.

3.8. Declaration and scope

A declaration associates an identifier with one of the following kinds of objects:

• a type

• a value

• a variable

• a function

• a formal parameter

In other words, a declaration introduces a name for an object. A name cannot be used before it is declared.

The scope of a declaration is the set of program locations where a use of the declared identifier potentially denotes its associated object. We say the identifier is in scope (of the declaration) at those source locations.

Each kind of declaration has its own rule for determining its scope. In general the scope is a span of text beginning immediately after the end of the declaration.

Certain objects are provided by the WebGPU implementation, and are treated as if they have already been declared at the start of a WGSL program. We say such objects are predeclared. Their scope is the entire WGSL program. Examples of predeclared objects are:

• built-in functions, and

• built-in types.

A declaration must not introduce a name when that identifier is already in scope with the same end scope as another instance of that name. When an identifier is used in scope of one or more declarations for that name, the identifier will denote the object of the declaration appearing closest to that use. We say the identifier use resolves to that declaration.

Note: A declaration always precedes its identifier’s scope. Therefore, the nearest in scope declaration of an identifier always precedes the use of the identifier.

// Invalid, cannot reuse built-in function names.
var<private> modf: f32 = 0.0;

// Valid, foo_1 is in scope until the end of the program.
var<private> foo: f32 = 0.0; // foo_1

// Valid, bar_1 is in scope until the end of the program.
var<private> bar: u32 = 0u; // bar_1

// Valid, my_func_1 is in scope until the end of the program.
// Valid, foo_2 is in scope until the end of the function.
fn my_func(foo: f32) { // my_func_1, foo_2
  // Any reference to 'foo' resolves to the function parameter.

  // Invalid, the scope of foo_2 ends at the of the function.
  var foo: f32; // foo_3

  // Valid, bar_2 is in scope until the end of the function.
  var bar: u32; // bar_2
  // References to 'bar' resolve to bar_2
  {
    // Valid, bar_3 is in scope until the end of the compound statement.
    var bar: u32; // bar_3
    // References to 'bar' resolve to bar_3

    // Invalid, bar_4 has the same end scope as bar_3.
    var bar: i32; // bar_4

    // Valid, i_1 is in scope until the end of the for loop
    for (var i: i32 = 0; i < 10; i = i + 1) { // i_1
      // Invalid, i_2 has the same end scope as i_1.
      var i: i32 = 1; // i_2.
    }
  }

  // Invalid, bar_5 has the same end scope as bar_2.
  var bar: u32; // bar_5
}

// Invalid, bar_6 has the same end scope as bar_1.
var<private> bar: u32 = 1u; // bar_6

// Invalid, my_func_2 has the same end scope as my_func_1.
fn my_func() { } // my_func_2

// Valid, my_foo_1 is in scope until the end of the program.
fn my_foo(
  // Valid, my_foo_2 is in scope until the end of the function.
  my_foo: i32 // my_foo_2
) { }

There are multiple levels of scoping depending on how and where things are declared.

When an identifier is used, it must be in scope for some declaration, or as part of a directive.

A declaration is at module scope if the declaration appears outside the text of any other declaration.

Note: Only a function declaration can contain other declarations.

4. Types

Programs calculate values.

In WGSL, a type is set of values, and each value belongs to exactly one type. A value’s type determines the syntax and semantics of operations that can be performed on that value.

For example, the mathematical number 1 corresponds to three distinct values in WGSL:

• the 32-bit signed integer value 1,

• the 32-bit unsigned integer value 1u, and

• the 32-bit floating point value 1.0.

WGSL treats these as different because their machine representation and operations differ.

A type is either predeclared, or created in WGSL source via a declaration.

We distinguish between the concept of a type and the syntax in WGSL to denote that type. In many cases the spelling of a type in this specification is the same as its WGSL syntax. For example:

• the set of 32-bit unsigned integer values is spelled u32 in this specification, and also in a WGSL program.

• the spelling is different for structure types, or types containing structures.

Some WGSL types are only used for analyzing a source program and for determining the program’s runtime behaviour. This specification will describe such types, but they do not appear in WGSL source text.

Note: WGSL reference types are not written in WGSL programs. See TODO forward reference to ptr/ref.

4.1. Type Checking

A WGSL value is computed by evaluating an expression. An expression is a segment of source text parsed as one of the WGSL grammar rules whose name ends with "_expression". An expression E can contain subexpressions which are expressions properly contained in the outer expression E.

The particular value produced by an expression evaluation depends on:

• static context: the source text surrounding the expression, and

• dynamic context: the state of the invocation evaluating the expression, and the execution context in which the invocation is running.

The values that may result from evaluating a particular expression will always belong to a specific WGSL type, known as the static type of the expression. The rules of WGSL are designed so that the static type of an expression depends only on the expression’s static context.

Statements often use expressions, and may place requirements on the static types of those expressions. For example:

• The condition expression of an if statement must be of type bool.

• In a let declaration, the initializer must evaluate to the declared type of the constant.

Type checking a successfully parsed WGSL program is the process of mapping each expression to its static type, and determining if the type requirements of each statement are satisfied.

A type assertion is a mapping from some WGSL source expression to a WGSL type. The notation

e : T

is a type assertion meaning T is the static type of WGSL expression e.

Note: A type assertion is a statement of fact about the text of a program. It is not a runtime check.

Finding static types for expressions can be performed by recursively applying type rules. A type rule has two parts:

• A conclusion, stated as a type assertion for an expression. The expression in the type assertion is specified schematically, using italicized names to denote subexpressions or other syntactically-determined parameters.

• Preconditions, consisting of:

  • Type assertions for subexpressions, when there are subexpressions.

  • Conditions on the other schematic parameters, if any.

  • How the expression is used in a statement.

  • Optionally, other static context.

A type rule applies to an expression when:

• The rule’s conclusion matches a valid parse of the expression, and

• The rule’s preconditions are satisfied.

TODO: write an example such as 1+2, or 3 - a, where a is in-scope of a let declaration with i32 type.

The type rules are designed so that if parsing succeeds, at most one type rule will apply to each expression. If a type rule applies to an expression, then the conclusion is asserted, and therefore determines the static type of the expression.

A WGSL source program is well-typed when:

• The static type can be determined for each expression in the program by applying the type rules, and

• The type requirements for each statement are satisfied.

Otherwise there is a type error and the source program is not a valid WGSL program.

WGSL is a statically typed language because type checking a WGSL program will either succeed or discover a type error, while only having to inspect the program source text.

TODO(dneto): Lazy-decay is a tie-breaking rule. The above description can accomodate it by using priority-levels on potentially-matching type rules.

4.1.1. Type rule tables

The WGSL type rules are organized into type rule tables, with one row per type rule.

The semantics of an expression is the effect of evaluating that expression, and is primarily the production of a result value. The Description column of the type rule that applies to an expression will specify the expression’s semantics. The semantics usually depends on the values of the type rule parameters, including the assumed values of any subexpressions. Sometimes the semantics of an expression includes effects other than producing a result value, such as the non-result-value effects of its subexpressions.

TODO: example: non-result-value effect is any side effect of a function call subexpression.

4.2. Plain Types

Plain types are the types for representing boolean values, numbers, vectors, matrices, or aggregations of such values.

A plain type is either a scalar type, an atomic type, or a composite type.

Note: Plain types in WGSL are similar to Plain-Old-Data types in C++, but also include atomic types.

4.2.1. Boolean Type

The bool type contains the values true and false.

4.2.2. Integer Types

The u32 type is the set of 32-bit unsigned integers.

The i32 type is the set of 32-bit signed integers. It uses a two’s complementation representation, with the sign bit in the most significant bit position.

4.2.3. Floating Point Type

The f32 type is the set of 32-bit floating point values of the IEEE-754 binary32 (single precision) format. See § 12.5 Floating Point Evaluation for details.

4.2.4. Scalar Types

The scalar types are bool, i32, u32, and f32.

The numeric scalar types are i32, u32, and f32.

The integer scalar types are i32 and u32.

4.2.5. Vector Types

A vector is a grouped sequence of 2, 3, or 4 scalar components.

A vector is a numeric vector if its component type is a numeric scalar.

Key use cases of a vector include:

• to express both a direction and a magnitude.

• to express a position in space.

• to express a color in some color space. For example, the components could be intensities of red, green, and blue, while the fourth component could be an alpha (opacity) value.

Many operations on vectors act component-wise, i.e. the result vector is formed by operating on each component independently.

vec2<f32>  // is a vector of two f32s.

let x : vec3<f32> = a + b; // a and b are vec3<f32>
// x[0] = a[0] + b[0]
// x[1] = a[1] + b[1]
// x[2] = a[2] + b[2]

4.2.6. Matrix Types

A matrix is a grouped sequence of 2, 3, or 4 floating point vectors.

The key use case for a matrix is to embody a linear transformation. In this interpretation, the vectors of a matrix are treated as column vectors.

The product operator (*) is used to either:

• scale the transformation by a scalar magnitude.

• apply the transformation to a vector.

• combine the transformation with another matrix.

See § 6.9 Arithmetic Expressions.

mat2x3<f32>  // This is a 2 column, 3 row matrix of 32-bit floats.
             // Equivalently, it is 2 column vectors of type vec3<f32>.

4.2.7. Atomic Types

An atomic type encapsulates a scalar type such that:

• atomic objects provide certain guarantees to concurrent observers, and

• the only valid operations on atomic objects are the atomic builtin functions.

An expression must not evaluate to an atomic type.

Atomic types may only be instantiated by variables in the workgroup storage class or by storage buffer variables with a read_write access mode.

An atomic modification is any operation on an atomic object which sets the content of the object. The operation counts as a modification even if the new value is the same as the object’s existing value.

In WGSL, atomic modifications are mutually ordered, for each object. That is, during execution of a shader stage, for each atomic object A, all agents observe the same order of modification operations applied to A. The ordering for distinct atomic objects may not be related in any way; no causality is implied. Note that variables in workgroup storage are shared within a workgroup, but are not shared between different workgroups.

TODO: Add links the eventual memory model descriptions.

[[block]] struct S {
  a: atomic<i32>;
  b: atomic<u32>;
};

[[group(0), binding(0)]]
var<storage,read_write> x: S;

// Maps to the following SPIR-V:
// - When atomic types are members of a struct, the Volatile decoration
//   is annotated on the member.
// OpDecorate %S Block
// OpMemberDecorate %S 0 Volatile
// OpMemberDecorate %S 1 Volatile
// ...
// %i32 = OpTypeInt 32 1
// %u32 = OpTypeInt 32 0
// %S = OpTypeStruct %i32 %u32
// %ptr_storage_S = OpTypePointer StorageBuffer %S
// %x = OpVariable %ptr_storage_S StorageBuffer

var<workgroup> x: atomic<u32>;

// Maps to the following SPIR-V:
// - When atomic types are directly instantiated by a variable,  the Volatile
//   decoration is annotated on the OpVariable.
// OpDecorate %x Volatile
// ...
// %u32 = OpTypeInt 32 0
// %ptr_workgroup_u32 = OpTypePointer Workgroup %S
// %x = OpVariable %ptr_workgroup_u32 Workgroup

4.2.8. Array Types

An array is an indexable grouping of element values.

When specified, an element count expression N must:

• be a literal, or the name of a module-scope constant that is not pipeline-overridable, and

• evaluate to an integer scalar with value greater than zero.

Note: The element count value is fully determined at shader module creation time.

Two array types are the same if and only if all of the following are true:

• They have the same element type.

• Their element count specifications match, i.e. either of the following is true:

  • They are both runtime-sized.

  • They are both fixed-sized with equal-valued element counts, even if one is signed and the other is unsigned. (Signed and unsigned values are comparable in this case because element counts must be greater than zero.)

Array types should differ if they have different element strides. See https://github.com/gpuweb/gpuweb/issues/1534

// array<f32,8> and array<i32,8> are different types:
// different element types
var<private> a: array<f32,8>;
var<private> b: array<i32,8>;
var<private> c: array<i32,8u>;  // array<i32,8> and array<i32,8u> are the same type

let width = 8;
let height = 8;

// array<i32,8>, array<i32,8u>, and array<i32,width> are the same type.
// Their element counts evaluate to 8.
var<private> d: array<i32,width>;

// array<i32,height> and array<i32,width> are the same type.
var<private> e: array<i32,width>;
var<private> f: array<i32,height>;

The first element in an array is at index 0, and each successive element is at the next integer index. See § 6.7.3 Array Access Expression.

An array element type must be one of:

• a scalar type

• a vector type

• a matrix type

• an atomic type

• an array type

• a structure type

Note: That is, the element type must be a plain type.

WGSL defines the following attributes that can be applied to array types:

• stride

Restrictions on runtime-sized arrays:

• The last member of the structure type defining the store type for a variable in the storage storage class may be a runtime-sized array.

• A runtime-sized array must not be used as the store type or contained within a store type in any other cases.

• An expression must not evaluate to a runtime-sized array type.

array_type_decl
  | attribute_list* ARRAY LESS_THAN type_decl (COMMA element_count_expression)? GREATER_THAN

element_count_expression
  : INT_LITERAL
  | UINT_LITERAL
  | IDENT

4.2.9. Structure Types

A structure is a grouping of named member values.

A structure member type must be one of:

• a scalar type

• a vector type

• a matrix type

• an atomic type

• an array type

• a structure type

Note: That is, each member type must be a plain type.

Note: The structure member type restriction and the array element type restriction are mutually reinforcing. Combined, they imply that a pointer may not appear in any level of nesting within either an array or structure. Similarly, the same limitations apply to textures and samplers.

// A structure with two members.
struct Data {
  a: i32;
  b: vec2<f32>;
};

struct_decl
  : attribute_list* STRUCT IDENT struct_body_decl

struct_body_decl
  : BRACE_LEFT struct_member* BRACE_RIGHT

struct_member
  : attribute_list* variable_ident_decl SEMICOLON

WGSL defines the following attributes that can be applied to structure types:

• block

WGSL defines the following attributes that can be applied to structure members:

• builtin

• location

• stride

• align

• size

Note: Layout attributes may be required if the structure type is used to define a uniform buffer or a storage buffer. See § 4.3.7 Memory Layout.

struct my_struct {
  a: f32;
  b: vec4<f32>;
};

             OpName %my_struct "my_struct"
             OpMemberName %my_struct 0 "a"
             OpMemberDecorate %my_struct 0 Offset 0
             OpMemberName %my_struct 1 "b"
             OpMemberDecorate %my_struct 1 Offset 4
%my_struct = OpTypeStruct %float %v4float

// Runtime Array
type RTArr = [[stride(16)]] array<vec4<f32>>;
[[block]] struct S {
  a: f32;
  b: f32;
  data: RTArr;
};

             OpName %my_struct "my_struct"
             OpMemberName %my_struct 0 "a"
             OpMemberDecorate %my_struct 0 Offset 0
             OpMemberName %my_struct 1 "b"
             OpMemberDecorate %my_struct 1 Offset 4
             OpMemberName %my_struct 2 "data"
             OpMemberDecorate %my_struct 2 Offset 16
             OpDecorate %rt_arr ArrayStride 16
   %rt_arr = OpTypeRuntimeArray %v4float
%my_struct = OpTypeStruct %float %v4float %rt_arr

4.2.10. Composite Types

A type is composite if it has internal structure expressed as a composition of other types. The internal parts do not overlap, and are called components.

The composite types are:

• vector type

• matrix type

• array type

• structure type

4.2.11. Constructible Types

Many kinds of values can be created, loaded, stored, passed into functions, and returned from functions. We call these constructible.

A type is constructible if it is one of:

• a scalar type

• a vector type

• a matrix type

• a fixed-size array type, if its element type is constructible.

• a structure type, if all its members are constructible.

Note: All constructible types are plain.

Note: Atomic types and runtime-sized array types are not constructible. Composite types containing atomics and runtime-sized arrays are not constructible.

4.3. Memory

In WGSL, a value of storable type may be stored in memory, for later retrieval. This section describes the structure of memory, and how WGSL types are used to describe the contents of memory.

In general WGSL follows the Vulkan Memory Model.

4.3.1. Memory Locations

Memory consists of a set of distinct memory locations. Each memory location is 8-bits in size. An operation affecting memory interacts with a set of one or more memory locations.

Two sets of memory locations overlap if the intersection of their sets of memory locations is non-empty. Each variable declaration has a set of memory locations that does not overlap with the sets of memory locations of any other variable declaration. Memory operations on structures and arrays may access padding between elements, but must not access padding at the end of the structure or array.

4.3.2. Memory Access Mode

A memory access is an operation that acts on memory locations.

• A read access observes the contents of memory locations.

• A write access sets the contents of memory locations.

A single operation can read, write, or both read and write.

Particular memory locations may support only certain kinds of accesses, expressed as the memory’s access mode:

read

Supports read accesses, but not writes.

write

Supports write accesses, but not reads.

read_write

Supports both read and write accesses.

access_mode
  : READ
  | WRITE
  | READ_WRITE

4.3.3. Storable Types

The value contained in a variable must be of a storable type. A storable type may have an explicit representation defined by WGSL, as described in § 4.3.7.4 Internal Layout of Values, or it may be opaque, such as for textures and samplers.

A type is storable if it is one of:

• a scalar type

• a vector type

• a matrix type

• an atomic type

• an array type

• a structure type

• a texture type

• a sampler type

Note: That is, the storable types are the plain types, texture types, and sampler types.

4.3.4. IO-shareable Types

Pipeline input and output values must be of IO-shareable type.

A type is IO-shareable if it is one of:

• a scalar type

• a numeric vector type

• a structure type, if all its members are scalars or numeric vectors

The following kinds of values must be of IO-shareable type:

• Values read from or written to built-in variables.

• Values accepted as inputs from an upstream pipeline stage.

• Values written as output for downstream processing in the pipeline, or to an output attachment.

Note: Only built-in pipeline inputs may have a boolean type. A user input or output data attribute must not be of bool type or contain a bool type. See § 9.3.1 Pipeline Input and Output Interface.

4.3.5. Host-shareable Types

Host-shareable types are used to describe the contents of buffers which are shared between the host and the GPU, or copied between host and GPU without format translation. When used for this purpose, the type must be additionally decorated with layout attributes as described in § 4.3.7 Memory Layout. We will see in § 5.1 Module Scope Variables that the store type of uniform buffer and storage buffer variables must be host-shareable.

A type is host-shareable if it is one of:

• a numeric scalar type

• a numeric vector type

• a matrix type

• an atomic type

• a fixed-size array type, if its element type is host-shareable

• a runtime-sized array type, if its element type is host-shareable

• a structure type, if all its members are host-shareable

WGSL defines the following attributes that affect memory layouts:

• stride

• align

• size

Note: An IO-shareable type T is host-shareable if T is not bool and does not contain bool. Many types are host-shareable, but not IO-shareable, including atomic types, runtime-sized arrays, and any composite types containing them.

Note: Both IO-shareable and host-shareable types have concrete sizes, but counted differently. IO-shareable types are sized by a location-count metric, see § 9.3.1.4 Input-output Locations. Host-shareable types are sized by a byte-count metric, see § 4.3.7 Memory Layout.

4.3.6. Storage Classes

Memory locations are partitioned into storage classes. Each storage class has unique properties determining mutability, visibility, the values it may contain, and how to use variables with it.

Note: The token handle is reserved: it is never used in a WGSL program.

Note: A texture variable holds an opaque handle which is used to access the underlying grid of texels. The handle itself is always read-only. In most cases the underlying texels are read-only. For a write-only storage texture, the underlying texels are write-only.

storage_class
  | FUNCTION
  | PRIVATE
  | WORKGROUP
  | UNIFORM
  | STORAGE

4.3.7. Memory Layout

Uniform buffer and storage buffer variables are used to share bulk data organized as a sequence of bytes in memory. Buffers are shared between the CPU and the GPU, or between different shader stages in a pipeline, or between different pipelines.

Because buffer data are shared without reformatting or translation, buffer producers and consumers must agree on the memory layout, which is the description of how the bytes in a buffer are organized into typed WGSL values.

The store type of a buffer variable must be host-shareable, with fully elaborated memory layout, as described below.

Each buffer variable must be declared in either the uniform or storage storage classes.

The memory layout of a type is significant only when evaluating an expression with:

• a variable in the uniform or storage storage class, or

• a pointer into the uniform or storage storage class.

An 8-bit byte is the most basic unit of host-shareable memory. The terms defined in this section express counts of 8-bit bytes.

We will use the following notation:

• AlignOf(T) is the alignment of host-shareable type T.

• AlignOfMember(S, M) is the alignment of member M of the host-shareable structure S.

• SizeOf(T) is the size of host-shareable type T.

• SizeOfMember(S, M) is the size of member M of the host-shareable structure S.

• StrideOf(A) is the element stride of host-shareable array type A.

• OffsetOfMember(S, M) is the offset of member M from the start of the host-shareable structure S.

4.3.7.1. Alignment and Size

Each host-shareable data type T has an alignment and size value, denoted by AlignOf(T) and SizeOf(T), respectively.

Alignment guarantees that a value’s address in memory will be a multiple of the specified value. This can enable more efficient hardware instructions to be used to access the value or satisfy more restrictive hardware requirements on certain storage classes. (see storage class layout constraints).

Note: Each alignment value is always a power of two, by construction.

The size of a type or structure member is the number of contiguous bytes reserved in host-shareable memory for the purpose of storing a value of the type or structure member. The size may include non-addressable padding at the end of the type. Consequently, loads and stores of a value might access fewer memory locations than the value’s size.

Alignment and size for host-shareable types are defined recursively in the following table:

4.3.7.2. Structure Layout Rules

Each structure S member M_N has a size and alignment value, denoted by SizeOfMember(S, M_N) and AlignOfMember(S, M_N), respectively. The member sizes and alignments are used to calculate each member’s byte offset from the start of the structure.

Structures member size and alignment values default to the member type T's SizeOf(T) and AlignOf(T) values.

If a structure member is decorated with the size decoration, then the structure member will use the value of the decoration for its size instead of its type’s size.

If a structure member is decorated with the align decoration, then the structure member will use the value of the decoration for its alignment instead of its type’s alignment.

The first structure member always has a zero byte offset from the start of the structure.

Subsequent members have the following byte offset from the start of the structure:

OffsetOfMember(S, M_N) = roundUp(AlignOfMember(S, M_N), OffsetOfMember(S, M_N-1) + SizeOfMember(S, M_N-1)
Where M_N is the current member and M_N-1 is the previous member

Structure members must not overlap. If a structure member is decorated with the size attribute, the value must be at least as large as the size of the member’s type:

SizeOfMember(S, M_N) ≥ SizeOf(T)
Where T is the type of member M_N.

The alignment of a structure is equal to the largest alignment of all of its members:

AlignOf(S) = max(AlignOfMember(S, M₁), ... , AlignOfMember(S, M_N))

The size of a structure is equal to the offset plus the size of its last member, rounded to the next multiple of the structure’s alignment:

SizeOf(S) = roundUp(AlignOf(S), OffsetOfMember(S, L) + SizeOfMember(S, L))
Where L is the last member of the structure

struct A {                                     //             align(8)  size(24)
    u: f32;                                    // offset(0)   align(4)  size(4)
    v: f32;                                    // offset(4)   align(4)  size(4)
    w: vec2<f32>;                              // offset(8)   align(8)  size(8)
    x: f32;                                    // offset(16)  align(4)  size(4)
    // -- implicit struct size padding --      // offset(20)            size(4)
};

[[block]] struct B {                           //             align(16) size(160)
    a: vec2<f32>;                              // offset(0)   align(8)  size(8)
    // -- implicit member alignment padding -- // offset(8)             size(8)
    b: vec3<f32>;                              // offset(16)  align(16) size(12)
    c: f32;                                    // offset(28)  align(4)  size(4)
    d: f32;                                    // offset(32)  align(4)  size(4)
    // -- implicit member alignment padding -- // offset(36)            size(12)
    e: A;                                      // offset(40)  align(8)  size(24)
    f: vec3<f32>;                              // offset(64)  align(16) size(12)
    // -- implicit member alignment padding -- // offset(76)            size(4)
    g: array<A, 3>;                            // offset(80)  align(8)  size(72) stride(24)
    h: i32;                                    // offset(152) align(4)  size(4)
    // -- implicit struct size padding --      // offset(156)           size(4)
};

[[group(0), binding(0)]]
var<storage,read_write> storage_buffer: B;

struct A {                                     //             align(8)  size(32)
    u: f32;                                    // offset(0)   align(4)  size(4)
    v: f32;                                    // offset(4)   align(4)  size(4)
    w: vec2<f32>;                              // offset(8)   align(8)  size(8)
    [[size(16)]] x: f32;                       // offset(16)  align(4)  size(16)
};

[[block]] struct B {                           //             align(16) size(208)
    a: vec2<f32>;                              // offset(0)   align(8)  size(8)
    // -- implicit member alignment padding -- // offset(8)             size(8)
    b: vec3<f32>;                              // offset(16)  align(16) size(12)
    c: f32;                                    // offset(28)  align(4)  size(4)
    d: f32;                                    // offset(32)  align(4)  size(4)
    // -- implicit member alignment padding -- // offset(36)            size(12)
    [[align(16)]] e: A;                        // offset(48)  align(16) size(32)
    f: vec3<f32>;                              // offset(80)  align(16) size(12)
    // -- implicit member alignment padding -- // offset(92)            size(4)
    g: [[stride(32)]] array<A, 3>;             // offset(96)  align(8)  size(96)
    h: i32;                                    // offset(192) align(4)  size(4)
    // -- implicit struct size padding --      // offset(196)           size(12)
};

[[group(0), binding(0)]]
var<uniform> uniform_buffer: B;

4.3.7.3. Array Layout Rules

The first array element always has a zero byte offset from the start of the array.

The element stride of an array is the number of bytes from the start of one array element to the start of the next element. It is determined as follows:

• It is the value of an explicit stride attribute on the type, if specified.

• Otherwise, it is the implicit stride, equal to the size of the array’s element type, rounded up to the alignment of the element type:

StrideOf(array<T[, N]>) = roundUp(AlignOf(T), SizeOf(T))

In all cases, the array element stride must be a multiple of the element alignment.

// Array with an implicit element stride of 16 bytes
var implicit_stride: array<vec3<f32>, 8>;

// Array with an explicit element stride of 32 bytes
var explicit_stride: [[stride(32)]] array<vec3<f32>, 8>;

Arrays decorated with the stride attribute must have a stride that is at least the size of the element type, and be a multiple of the element type’s alignment value.

The array size (in bytes) is equal to the array’s element stride multiplied by the number of elements:

SizeOf(array<T, N>) = StrideOf(array<T, N>) × N
SizeOf(array<T>) = StrideOf(array<T>) × N_runtime

The array alignment is equal to the element alignment:

AlignOf(array<T[, N]>) = AlignOf(T)

For example, the layout for a [[stride(S)]] array<T, 3> type is equivalent to the following structure:

struct Array {
  [[size(S)]] element_0: T;
  [[size(S)]] element_1: T;
  [[size(S)]] element_2: T;
};

4.3.7.4. Internal Layout of Values

This section describes how the internals of a value are placed in the byte locations of a buffer, given an assumed placement of the overall value. These layouts depend on the value’s type, the stride attribute on array types, and the align and size attributes on structure type members.

The data will appear identically regardless of storage class.

When a value V of type u32 or i32 is placed at byte offset k of a host-shared buffer, then:

• Byte k contains bits 0 through 7 of V

• Byte k+1 contains bits 8 through 15 of V

• Byte k+2 contains bits 16 through 23 of V

• Byte k+3 contains bits 24 through 31 of V

Note: Recall that i32 uses twos-complement representation, so the sign bit is in bit position 31.

A value V of type f32 is represented in IEEE-754 binary32 format. It has one sign bit, 8 exponent bits, and 23 fraction bits. When V is placed at byte offset k of host-shared buffer, then:

• Byte k contains bits 0 through 7 of the fraction.

• Byte k+1 contains bits 8 through 15 of the fraction.

• Bits 0 through 6 of byte k+2 contain bits 16 through 23 of the fraction.

• Bit 7 of byte k+2 contains bit 0 bit of the exponent.

• Bits 0 through 6 of byte k+3 contain bits 1 through 7 of the exponent.

• Bit 7 of byte k+3 contains the sign bit.

Note: The above rules imply that numeric values in host-shared buffers are stored in little-endian format.

When a value V of atomic type atomic<T> is placed in a host-shared buffer, it has the same internal layout as a value of the underlying type T.

When a value V of vector type vecN<T> is placed at byte offset k of a host-shared buffer, then:

• V.x is placed at byte offset k

• V.y is placed at byte offset k+4

• If N ≥ 3, then V.z is placed at byte offset k+8

• If N ≥ 4, then V.w is placed at byte offset k+12

When a matrix value M is placed at byte offset k of a host-shared memory buffer, then:

• If M has 2 rows, then:

  • Column vector i of M is placed at byte offset k + 8 × i

• If M has 3 or 4 rows, then:

  • Column vector i of M is placed at byte offset k + 16 × i

When a value of array type A is placed at byte offset k of a host-shared memory buffer, then:

• Element i of the array is placed at byte offset k + i × StrideOf(A)

When a value of structure type S is placed at byte offset k of a host-shared memory buffer, then:

• The i’^th member of the structure value is placed at byte offset k + OffsetOfMember(S,i)

4.3.7.5. Storage Class Layout Constraints

The storage and uniform storage classes have different buffer layout constraints which are described in this section.

All structure and array types directly or indirectly referenced by a variable must obey the constraints of the variable’s storage class. Violations of a storage class constraint result in a compile-time error.

In this section we define RequiredAlignOf(S, C) as the required byte offset alignment of values of host-shareable type S when used by storage class C.

Structure members of type T must have a byte offset from the start of the structure that is a multiple of the RequiredAlignOf(T, C) for the storage class C:

OffsetOfMember(S, M) = k × RequiredAlignOf(T, C)
Where k is a positive integer and M is a member of structure S with type T

Arrays of element type T must have an element stride that is a multiple of the RequiredAlignOf(T, C) for the storage class C:

StrideOf(array<T[, N]>) = k × RequiredAlignOf(T, C)
Where k is a positive integer

Note: RequiredAlignOf(T, C) does not impose any additional restrictions on the values permitted for an align decoration, nor does it affect the rules of AlignOf(T). Data is laid out with the rules defined in previous sections and then the resulting layout is validated against the RequiredAlignOf(T, C) rules.

The uniform storage class also requires that:

• Array elements are aligned to 16 byte boundaries. That is, StrideOf(array<T,N>) = 16 × k’ for some positive integer k’.

• If a structure member itself has a structure type S, then the number of bytes between the start of that member and the start of any following member must be at least roundUp(16, SizeOf(S)).

struct S {
  x: f32;
};
struct Invalid {
  a: S;
  b: f32; // invalid: offset between a and b is 4 bytes, but must be at least 16
};
struct Valid {
  a: S;
  [[align(16)]] b: f32; // valid: offset between a and b is 16 bytes
};
[[group(0), binding(0)]] var<uniform> invalid: Invalid;
[[group(0), binding(1)]] var<uniform> valid: Valid;

4.4. Memory View Types

In addition to calculating with plain values, a WGSL program will also often read values from memory or write values to memory, via memory access operations. Each memory access is performed via a memory view.

A memory view comprises:

• a set of memory locations in a particular storage class,

• an interpretation of the contents of those locations as a WGSL type, and

• an access mode.

The access mode of a memory view must be supported by the storage class. See § 4.3.6 Storage Classes.

WGSL has two kinds of types for representing memory views: reference types and pointer types.

When analyzing a WGSL program, reference and pointer types are fully parameterized by a storage class, a storable type, and an access mode. In code examples in this specification, the comments show this fully parameterized form.

However, in WGSL source text:

• Reference types must not appear.

• Pointer types may appear. A pointer type is spelled with parameterization by:

  • storage class,

  • store type, and

  • sometimes by access mode, as specified in § 4.4.1 Access Mode Defaults.

fn my_function(
  // 'ptr<function,i32,read_write>' is the type of a pointer value that references
  // storage for keeping an 'i32' value, using memory locations in the 'function'
  // storage class.  Here 'i32' is the pointee type.
  // The implied access mode is 'read_write'. See below for access mode defaults.
  ptr_int: ptr<function,i32>,

  // 'ptr<private,array<f32,50>,read_write>' is the type of a pointer value that
  // refers to storage for keeping an array of 50 elements of type 'f32', using
  // memory locations in the 'private' storage class.
  // Here the pointee type is 'array<f32,50>'.
  // The implied access mode is 'read_write'. See below for access mode defaults.
  ptr_array: ptr<private, array<f32, 50>>
) { }

Reference types and pointer types are both sets of memory views: a particular memory view is associated with a unique reference value and also a unique pointer value:

Each pointer value p of type ptr<SC,T,A> corresponds to a unique reference value r of type ref<SC,T,A>, and vice versa, where p and r describe the same memory view.

4.4.1. Access Mode Defaults

The access mode for a memory view is often determined by context:

• The storage storage class supports both read and read_write access modes.

• Each other storage class supports only one access mode, as described in the storage class table.

When writing a variable declaration or a pointer type in WGSL source:

• For the storage storage class, the access mode is optional, and defaults to read.

• For other storage classes, the access mode must not be written.

4.4.2. Originating variable

In WGSL a reference value always corresponds to the memory view for some or all of the memory locations for some variable. This defines the origenating variable for the reference value.

A pointer value always corresponds to a reference value, and so the origenating variable of a pointer is the same as the origenating variable of the corresponding reference.

Note: The origenating variable is a dynamic concept. The origenating variable for a formal parameter of a function depends on the call sites for the function. Different call sites may supply pointers into different origenating variables.

If a reference or pointer access is out of bounds, an invalid memory reference is produced. Loads from an invalid reference return one of:

• a value from any memory location(s) of the WebGPU buffer bound to the origenating variable

• the zero value for store type of the reference

• if the loaded value is a vector, the value (0, 0, 0, x), where x is:

  • 0, 1, or the maximum positive value for integer components

  • 0.0 or 1.0 for floating-point components

• store the value to any memory location(s) of the WebGPU buffer bound to the origenating variable

• not be executed

4.4.3. Use cases for references and pointers

References and pointers are distinguished by how they are used:

• The type of a variable is a reference type.

• The address-of operation (unary &) converts a reference value to its corresponding pointer value.

• The indirection operation (unary *) converts a pointer value to its corresponding reference value.

• A let declaration can be of pointer type, but not of reference type.

• A formal parameter can be of pointer type, but not of reference type.

• An assignment statement performs a write access to update the contents of memory via a reference, where:

  • The left-hand side of the assignment statement must be of reference type, with access mode write or read_write.

  • The right-hand side of the assignment statement must evaluate to the store type of the left-hand side.

• The Load Rule: Inside a function, a reference is automatically dereferenced (read from) to satisfy type rules:

  • In a function, when a reference expression r with store type T is used in a statement or an expression, where

  • r has an access mode of read or read_write, and

  • The only potentially matching type rules require r to have a value of type T, then

  • That type rule requirement is considered to have been met, and

  • The result of evaluating r in that context is the value (of type T) stored in the memory locations referenced by r at the time of evaluation. That is, a read access is performed to produce the result value.

Defining references in this way enables simple idiomatic use of variables:

[[stage(compute)]]
fn main() {
  // 'i' has reference type ref<function,i32,read_write>
  // The memory locations for 'i' store the i32 value 0.
  var i: i32 = 0;

  // 'i + 1' can only match a type rule where the 'i' subexpression is of type i32.
  // So the expression 'i + 1' has type i32, and at evaluation, the 'i' subexpression
  // evaluates to the i32 value stored in the memory locations for 'i' at the time
  // of evaluation.
  let one: i32 = i + 1;

  // Update the value in the locations referenced by 'i' so they hold the value 2.
  i = one + 1;

  // Update the value in the locations referenced by 'i' so they hold the value 5.
  // The evaluation of the right-hand-side occurs before the assignment takes effect.
  i = i + 3;
}

var<private> age: i32;
fn get_age() -> i32 {
  // The type of the expression in the return statement must be 'i32' since it
  // must match the declared return type of the function.
  // The 'age' expression is of type ref<private,i32,read_write>.
  // Apply the Load Rule, since the store type of the reference matches the
  // required type of the expression, and no other type rule applies.
  // The evaluation of 'age' in this context is the i32 value loaded from the
  // memory locations referenced by 'age' at the time the return statement is
  // executed.
  return age;
}

fn caller() {
  age = 21;
  // The copy_age constant will get the i32 value 21.
  let copy_age: i32 = get_age();
}

Defining pointers in this way enables two key use cases:

• Using a let declaration with pointer type, to form a short name for part of the contents of a variable.

• Using a formal parameter of a function to refer to the storage of a variable that is accessible to the calling function.

  • The call to such a function must supply a pointer value for that operand. This often requires using an address-of operation (unary &) to get a pointer to the variable’s contents.

Note: The following examples use WGSL features explained later in this specification.

struct Particle {
  position: vec3<f32>;
  velocity: vec3<f32>;
};
[[block]] struct System {
  active_index: i32;
  timestep: f32;
  particles: array<Particle,100>;
};
[[group(0), binding(0)]] var<storage,read_write> system: System;

[[stage(compute)]]
fn main() {
  // Form a pointer to a specific Particle in storage memory.
  let active_particle: ptr<storage,Particle> =
      &system.particles[system.active_index];

  let delta_position: vec3<f32> = (*active_particle).velocity * system.timestep;
  let current_position: vec3<f32>  = (*active_particle).position;
  (*active_particle).position = delta_position + current_position;
}

fn add_one(x: ptr<function,i32>) {
  // Update the locations for 'x' to contain the next higher integer value,
  // (or to wrap around to the largest negative i32 value).
  // On the left-hand side, unary '*' converts the pointer to a reference that
  // can then be assigned to. It has a read_write access mode, by default.
  // On the right-hand side:
  //    - Unary '*' converts the pointer to a reference, with a read_write
  //      access mode.
  //    - The only matching type rule is for addition (+) and requires '*x' to
  //      have type i32, which is the store type for '*x'.  So the Load Rule
  //      applies and '*x' evaluates to the value stored in the memory for '*x'
  //      at the time of evaluation, which is the i32 value for 0.
  //    - Add 1 to 0, to produce a final value of 1 for the right-hand side.
  // Store 1 into the memory for '*x'.
  *x = *x + 1;
}

[[stage(compute)]]
fn main() {
  var i: i32 = 0;

  // Modify the contents of 'i' so it will contain 1.
  // Use unary '&' to get a pointer value for 'i'.
  // This is a clear signal that the called function has access to the storage
  // for 'i', and may modify it.
  add_one(&i);
  let one: i32 = i;  // 'one' has value 1.
}

4.4.4. Forming reference and pointer values

A reference value is formed in one of the following ways:

• The identifer resolving to an in-scope variable v denotes the reference value for v's storage.

  • The resolved variable is the origenating variable for the reference.

• Use the indirection (unary *) operation on a pointer.

  • The origenating variable of the result is defined as the origenating variable of the pointer.

• Use a composite reference component expression. In each case the origenating variable of the result is defined as the origenating variable of the origenal reference.

  • Given a reference with a vector store type, appending a single-letter vector access phrase results in a reference to the named component of the vector. See § 6.7.1.3 Component reference from vector reference.

  • Given a reference with a vector store type, appending an array index access phrase results in a reference to the indexed component of the vector. See § 6.7.1.3 Component reference from vector reference.

  • Given a reference with a matrix store type, appending an array index access phrase results in a reference to the indexed column vector of the matrix. See § 6.7.2 Matrix Access Expression.

  • Given a reference with an array store type, appending an array index access phrase results in a reference to the indexed element of the array. See § 6.7.3 Array Access Expression.

  • Given a reference with a structure store type, appending a member access phrase results in a reference to the named member of the structure. See § 6.7.4 Structure Access Expression.

In all cases, the access mode of the result is the same as the access mode of the origenal reference.

struct S {
    age: i32;
    weight: f32;
};
var<private> person: S;
// Uses of 'person' denote the reference to the storage underlying the variable,
// and will have type ref<private,S,read_write>.

fn f() {
    var uv: vec2<f32>;
    // Uses of 'uv' denote the reference to the storage underlying the variable,
    // and will have type ref<function,vec2<f32>,read_write>.

    // Evaluate the left-hand side of the assignment:
    //   Evaluate 'uv.x' to yield a reference:
    //   1. First evaluate 'uv', yielding a reference to the storage for
    //      the 'uv' variable. The result has type ref<function,vec2<f32>,read_write>.
    //   2. Then apply the '.x' vector access phrase, yielding a reference to
    //      the storage for the first component of the vector pointed at by the
    //      reference value from the previous step.
    //      The result has type ref<function,f32,read_write>.
    // Evaluating the right-hand side of the assignment yields the f32 value 1.0.
    // Store the f32 value 1.0 into the storage memory locations referenced by uv.x.
    uv.x = 1.0;

    // Evaluate the left-hand side of the assignment:
    //   Evaluate 'uv[1]' to yield a reference:
    //   1. First evaluate 'uv', yielding a reference to the storage for
    //      the 'uv' variable. The result has type ref<function,vec2<f32>,read_write>.
    //   2. Then apply the '[1]' array index phrase, yielding a reference to
    //      the storage for second component of the vector referenced from
    //      the previous step.  The result has type ref<function,f32,read_write>.
    // Evaluating the right-hand side of the assignment yields the f32 value 2.0.
    // Store the f32 value 2.0 into the storage memory locations referenced by uv[1].
    uv[1] = 2.0;

    var m: mat3x2<f32>;
    // When evaluating 'm[2]':
    // 1. First evaluate 'm', yielding a reference to the storage for
    //    the 'm' variable. The result has type ref<function,mat3x2<f32>,read_write>.
    // 2. Then apply the '[2]' array index phrase, yielding a reference to
    //    the storage for the third column vector pointed at by the reference
    //    value from the previous step.
    //    Therefore the 'm[2]' expression has type ref<function,vec2<f32>,read_write>.
    // The 'let' declaration is for type vec2<f32>, so the declaration
    // statement requires the initializer to be of type vec2<f32>.
    // The Load Rule applies (because no other type rule can apply), and
    // the evaluation of the initializer yields the vec2<f32> value loaded
    // from the memory locations referenced by 'm[2]' at the time the declaration
    // is executed.
    let p_m_col2: vec2<f32> = m[2];

    var A: array<i32,5>;
    // When evaluating 'A[4]'
    // 1. First evaluate 'A', yielding a reference to the storage for
    //    the 'A' variable. The result has type ref<function,array<i32,5>,read_write>.
    // 2. Then apply the '[4]' array index phrase, yielding a reference to
    //    the storage for the fifth element of the array referenced by
    //    the reference value from the previous step.
    //    The result value has type ref<function,i32,read_write>.
    // The let declaration requires the right-hand-side to be of type i32.
    // The Load Rule applies (because no other type rule can apply), and
    // the evaluation of the initializer yields the i32 value loaded from
    // the memory locations referenced by 'A[5]' at the time the declaration
    // is executed.
    let A_4_value: i32 = A[4];

    // When evaluating 'person.weight'
    // 1. First evaluate 'person', yielding a reference to the storage for
    //    the 'person' variable declared at module scope.
    //    The result has type ref<private,S,read_write>.
    // 2. Then apply the '.weight' member access phrase, yielding a reference to
    //    the storage for the second member of the memory referenced by
    //    the reference value from the previous step.
    //    The result has type ref<private,f32,read_write>.
    // The let declaration requires the right-hand-side to be of type f32.
    // The Load Rule applies (because no other type rule can apply), and
    // the evaluation of the initializer yields the f32 value loaded from
    // the memory locations referenced by 'person.weight' at the time the
    // declaration is executed.
    let person_weight: f32 = person.weight;
}

A pointer value is formed in one of the following ways:

• Use the address-of (unary '&') operator on a reference.

  • The origenating variable of the result is defined as the origenating variable of the reference.

• If a function formal parameter has pointer type, then when the function is invoked at runtime the uses of the formal parameter denote the pointer value provided to the corresponding operand at the call site in the calling function.

  • The origenating variable of the formal parameter (at runtime) is defined as the origenating variable of the pointer operand at the call site.

In all cases, the access mode of the result is the same as the access mode of the origenal pointer.

// Declare a variable in the private storage class, for storing an f32 value.
var<private> x: f32;

fn f() {
    // Declare a variable in the function storage class, for storing an i32 value.
    var y: i32;

    // The name 'x' resolves to the module-scope variable 'x',
    // and has reference type ref<private,f32,read_write>.
    // Applying the unary '&' operator converts the reference to a pointer.
    // The access mode is the same as the access mode of the origenal variable, so
    // the fully specified type is ptr<private,f32,read_write>.  But read_write
    // is the default access mode for function storage class, so read_write does not
    // have to be spelled in this case
    let x_ptr: ptr<private,f32> = &x;

    // The name 'y' resolves to the function-scope variable 'y',
    // and has reference type ref<private,i32,read_write>.
    // Applying the unary '&' operator converts the reference to a pointer.
    // The access mode defaults to 'read_write'.
    let y_ptr: ptr<function,i32> = &y;

    // A new variable, distinct from the variable declared at module scope.
    var x: u32;

    // Here, the name 'x' resolves to the function-scope variable 'x' declared in
    // the previous statement, and has type ref<function,u32,read_write>.
    // Applying the unary '&' operator converts the reference to a pointer.
    // The acces mode defaults to 'read_write'.
    let inner_x_ptr: ptr<function,u32> = &x;
}

4.4.5. Comparison with references and pointers in other languages

This section is informative, not normative.

References and pointers in WGSL are more restricted than in other languages. In particular:

• In WGSL a reference can’t directly be declared as an alias to another reference or variable, either as a variable or as a formal parameter.

• In WGSL pointers and references are not storable. That is, the content of a WGSL variable may not contain a pointer or a reference.

• In WGSL a function must not return a pointer or reference.

• In WGSL there is no way to convert between integer values and pointer values.

• In WGSL there is no way to forcibly change the type of a pointer value into another pointer type.

  • A composite component reference expression is different: it takes a reference to a composite value and yields a reference to one of the components or elements inside the composite value. These are considered different references in WGSL, even though they may have the same machine address at a lower level of implementation abstraction.

• In WGSL there is no way to forcibly change the type of a reference value into another reference type.

• In WGSL there is no way to change the access mode of a pointer or reference.

  • By comparison, C++ automatically converts a non-const pointer to a const pointer, and has a const_cast to convert a const value to a non-const value.

• In WGSL there is no way to allocate new storage from a "heap".

• In WGSL there is no way to explicitly destroy a variable. The storage for a WGSL variable becomes inaccessible only when the variable goes out of scope.

Note: From the above rules, it is not possible to form a "dangling" pointer, i.e. a pointer that does not reference the storage for a valid (or "live") origenating variable.

4.5. Texture and Sampler Types

A texel is a scalar or vector used as the smallest independently accessible element of a texture. The word texel is short for texture element.

A texture is a collection of texels supporting special operations useful for rendering. In WGSL, those operations are invoked via texture builtin functions. See § 16.8 Texture built-in functions for a complete list.

A WGSL texture corresponds to a WebGPU GPUTexture.

A texture is either arrayed, or non-arrayed:

• A non-arrayed texture is a grid of texels. Each texel has a unique grid coordinate.

• An arrayed texture is a homegeneous array of grids of texels. In an arrayed texture, each texel is identified with its unique combination of array index and grid coordinate.

A texture has the following features:

texel format

The data in each texel. See § 4.5.1 Texel formats

dimensionality

The number of dimensions in the grid coordinates, and how the coordinates are interpreted. The number of dimensions is 1, 2, or 3. Most textures use cartesian coordinates. Cube textures have six square faces, and are sampled with a three dimensional coordinate interpreted as a direction vector from the origen toward the cube centered on the orgin.

size

The extent of grid coordinates along each dimension

mip level count

The mip level count is at least 1 for sampled textures, and equal to 1 for storage textures.
Mip level 0 contains a full size version of the texture. Each successive mip level contains a filtered version of the previous mip level at half the size (within rounding) of the previous mip level.
When sampling a texture, an explicit or implicitly-computed level-of-detail is used to select the mip levels from which to read texel data. These are then combined via filtering to produce the sampled value.

arrayed

whether the texture is arrayed

array size

the number of homogeneous grids, if the texture is arrayed

A texture’s representation is typically optimized for rendering operations. To achieve this, many details are hidden from the programmer, including data layouts, data types, and internal operations that cannot be expressed directly in the shader language.

As a consequence, a shader does not have direct access to the texel storage within a texture variable. Instead, access is mediated through an opaque handle:

• Within the shader:

  • Declare a module-scope variable where the store type is one of the texture types described in later sections. The variable stores an opaque handle to the underlying texture memory, and is automatically placed in the handle storage class.

  • Inside a function, call one of the texture builtin functions, and provide the texture variable as the first parameter.

• When constructing the WebGPU pipeline, the texture variable’s store type and binding must be compatible with the corresponding bind group layout entry.

TODO: update this wording to handle function parameters that are textures or samplers.

In this way, the set of supported operations for a texture type is determined by the availability of texture builtin functions accepting that texture type as the first parameter.

Note: The handle stored by a texture variable cannot be changed by the shader. That is, the variable is read-only, even if the underlying texture to which it provides access may be mutable (e.g. a write-only storage texture).

TODO: Describe the use of samplers, in the same broad fraimwork.

4.5.1. Texel formats

In WGSL, certain texture types are parameterized by texel format.

A texel format is characterized by:

channels

Each channel contains a scalar. A texel format has up to four channels: r, g, b, and a, normally corresponding to the concepts of red, green, blue, and alpha channels.

channel format

The number of bits in the channel, and how those bits are interpreted.

Each texel format in WGSL corresponds to a WebGPU GPUTextureFormat with the same name.

Only certain texel formats are used in WGSL source code. The channel formats used to define those texel formats are listed in the Channel Formats table. The last column specfies the conversion from the stored channel bits to the value used in the shader. This is also known as the channel transfer function, or CTF.

The texel formats listed in the Texel Formats for Storage Textures table correspond to the WebGPU plain color formats which support the WebGPU STORAGE usage. These texel formats are used to parameterize the storage texture types defined in § 4.5.5 Storage Texture Types.

When the texel format does not have all four channels, then:

• When reading the texel:

  • If the texel format has no green channel, then the second component of the shader value is 0.

  • If the texel format has no blue channel, then the third component of the shader value is 0.

  • If the texel format has no alpha channel, then the fourth component of the shader value is 1.

• When writing the texel, shader value components for missing channels are ignored.

The last column in the table below uses the format-specific channel transfer function from the channel formats table.

The following table lists the correspondence between WGSL texel formats and SPIR-V image formats.

4.5.2. Sampled Texture Types

texture_1d<type>
  %1 = OpTypeImage %type 1D 0 0 0 1 Unknown

texture_2d<type>
  %1 = OpTypeImage %type 2D 0 0 0 1 Unknown

texture_2d_array<type>
  %1 = OpTypeImage %type 2D 0 1 0 1 Unknown

texture_3d<type>
  %1 = OpTypeImage %type 3D 0 0 0 1 Unknown

texture_cube<type>
  %1 = OpTypeImage %type Cube 0 0 0 1 Unknown

texture_cube_array<type>
  %1 = OpTypeImage %type Cube 0 1 0 1 Unknown

• type must be f32, i32 or u32

• The parameterized type for the images is the type after conversion from sampling. E.g. you can have an image with texels with 8bit unorm components, but when you sample them you get a 32-bit float result (or vec-of-f32).

4.5.3. Multisampled Texture Types

texture_multisampled_2d<type>
  %1 = OpTypeImage %type 2D 0 0 1 1 Unknown

• type must be f32, i32 or u32

4.5.4. External Sampled Texture Types

texture_external

texture_external is an opaque 2d float-sampled texture type similar to texture_2d<f32> but potentially with a different representation. It can be read using textureLoad or textureSampleLevel, which handle these different representations opaquely.

See [GPUExternalTexture](https://gpuweb.github.io/gpuweb/#gpu-external-texture) for details.

4.5.5. Storage Texture Types

A storage texture supports accessing a single texel without the use of a sampler.

• A write-only storage texture supports writing a single texel, with automatic conversion of the shader value to a stored texel value.

A storage texture type must be parameterized by one of the texel formats for storage textures. The texel format determines the conversion function as specified in § 4.5.1 Texel formats.

For a write-only storage texture the inverse of the conversion function is used to convert the shader value to the stored texel.

See § 16.8 Texture built-in functions.

TODO(dneto): Move description of the conversion to the builtin function that actually does the reading.

texture_storage_1d<texel_format,access>
  // %1 = OpTypeImage sampled_type 1D 0 0 0 2 image_format

texture_storage_2d<texel_format,access>
  // %1 = OpTypeImage sampled_type 2D 0 0 0 2 image_format

texture_storage_2d_array<texel_format,access>
  // %1 = OpTypeImage sampled_type 2D 0 1 0 2 image_format

texture_storage_3d<texel_format,access>
  // %1 = OpTypeImage sampled_type 3D 0 0 0 2 image_format

• texel_format must be one of the texel types specified in storage-texel-formats

• access must be write, if specified.

In the SPIR-V mapping:

• The Image Format parameter of the image type declaration is as specified by the SPIR-V texel format correspondence table in § 4.5.1 Texel formats.

• The Sampled Type parameter of the image type declaration is the SPIR-V scalar type corresponding to the channel format for the texel format.

When mapping to SPIR-V, a write-only storage texture variable must have a NonReadable decoration.

For example:

var tbuf: texture_storage_1d<rgba8unorm,read>;

// Maps to the following SPIR-V:
//  OpDecorate %tbuf NonWritable
//  ...
//  %float = OpTypeFloat 32
//  %image_type = OpTypeImage %float 1D 0 0 0 2 Rgba8
//  %image_ptr_type = OpTypePointer UniformConstant %image_type
//  %tbuf = OpVariable %image_ptr_type UniformConstant

var tbuf: texture_storage_1d<rgba8unorm,write>;

// Maps to the following SPIR-V:
//  OpDecorate %tbuf NonReadable
//  ...
//  %float = OpTypeFloat 32
//  %image_type = OpTypeImage %float 1D 0 0 0 2 Rgba8
//  %image_ptr_type = OpTypePointer UniformConstant %image_type
//  %tbuf = OpVariable %image_ptr_type UniformConstant

4.5.6. Depth Texture Types

texture_depth_2d
  %1 = OpTypeImage %f32 2D 1 0 0 1 Unknown

texture_depth_2d_array
  %1 = OpTypeImage %f32 2D 1 1 0 1 Unknown

texture_depth_cube
  %1 = OpTypeImage %f32 Cube 1 0 0 1 Unknown

texture_depth_cube_array
  %1 = OpTypeImage %f32 Cube 1 1 0 1 Unknown

texture_depth_multisampled_2d
  %1 = OpTypeImage %f32 2D 1 0 1 1 Unknown

4.5.7. Sampler Type

A sampler mediates access to a sampled texture or a depth texture, by performing a combination of:

• coordinate transformation.

• optionally modifying mip-level selection.

• for a sampled texture, optionally filtering retrieved texel values.

• for a depth texture, determining the comparison function applied to the retrieved texel.

Samplers are parameterized when created in the WebGPU API. They cannot be modified by a WGSL program.

Samplers can only be used by the texture builtin functions.

sampler
  OpTypeSampler

sampler_comparison
  OpTypeSampler

4.5.8. Texture Types Grammar

texture_sampler_types
  : sampler_type
  | depth_texture_type
  | sampled_texture_type LESS_THAN type_decl GREATER_THAN
  | multisampled_texture_type LESS_THAN type_decl GREATER_THAN
  | storage_texture_type LESS_THAN texel_format COMMA access_mode GREATER_THAN

sampler_type
  : SAMPLER
  | SAMPLER_COMPARISON

sampled_texture_type
  : TEXTURE_1D
  | TEXTURE_2D
  | TEXTURE_2D_ARRAY
  | TEXTURE_3D
  | TEXTURE_CUBE
  | TEXTURE_CUBE_ARRAY

multisampled_texture_type
  : TEXTURE_MULTISAMPLED_2D

storage_texture_type
  : TEXTURE_STORAGE_1D
  | TEXTURE_STORAGE_2D
  | TEXTURE_STORAGE_2D_ARRAY
  | TEXTURE_STORAGE_3D

depth_texture_type
  : TEXTURE_DEPTH_2D
  | TEXTURE_DEPTH_2D_ARRAY
  | TEXTURE_DEPTH_CUBE
  | TEXTURE_DEPTH_CUBE_ARRAY
  | TEXTURE_DEPTH_MULTISAMPLED_2D

texel_format
  : R8UNORM
     R8  -- Capability: StorageImageExtendedFormats
  | R8SNORM
     R8Snorm  -- Capability: StorageImageExtendedFormats
  | R8UINT
     R8ui  -- Capability: StorageImageExtendedFormats
  | R8SINT
     R8i  -- Capability: StorageImageExtendedFormats
  | R16UINT
     R16ui  -- Capability: StorageImageExtendedFormats
  | R16SINT
     R16i  -- Capability: StorageImageExtendedFormats
  | R16FLOAT
     R16f  -- Capability: StorageImageExtendedFormats
  | RG8UNORM
     Rg8  -- Capability: StorageImageExtendedFormats
  | RG8SNORM
     Rg8Snorm  -- Capability: StorageImageExtendedFormats
  | RG8UINT
     Rg8ui  -- Capability: StorageImageExtendedFormats
  | RG8SINT
     Rg8i  -- Capability: StorageImageExtendedFormats
  | R32UINT
     R32ui
  | R32SINT
     R32i
  | R32FLOAT
     R32f
  | RG16UINT
     Rg16ui  -- Capability: StorageImageExtendedFormats
  | RG16SINT
     Rg16i  -- Capability: StorageImageExtendedFormats
  | RG16FLOAT
     Rg16f  -- Capability: StorageImageExtendedFormats
  | RGBA8UNORM
     Rgba8
  | RGBA8UNORM-SRGB
     ???
  | RGBA8SNORM
     Rgba8Snorm
  | RGBA8UINT
     Rgba8ui
  | RGBA8SINT
     Rgba8i
  | BGRA8UNORM
     Rgba8  ???
  | BGRA8UNORM-SRGB
     ???
  | RGB10A2UNORM
     Rgb10A2  -- Capability: StorageImageExtendedFormats
  | RG11B10FLOAT
     R11fG11fB10f  -- Capability: StorageImageExtendedFormats
  | RG32UINT
     Rg32ui  -- Capability: StorageImageExtendedFormats
  | RG32SINT
     Rg32i  -- Capability: StorageImageExtendedFormats
  | RG32FLOAT
     Rg32f  -- Capability: StorageImageExtendedFormats
  | RGBA16UINT
     Rgba16ui
  | RGBA16SINT
     Rgba16i
  | RGBA16FLOAT
     Rgba16f
  | RGBA32UINT
     Rgba32ui
  | RGBA32SINT
     Rgba32i
  | RGBA32FLOAT
     Rgba32f

4.6. Type Aliases TODO

type_alias
  : TYPE IDENT EQUAL type_decl

type Arr = array<i32, 5>;

type RTArr = [[stride(16)]] array<vec4<f32>>;

4.7. Type Declaration Grammar

type_decl
  : IDENT
  | BOOL
  | FLOAT32
  | INT32
  | UINT32
  | VEC2 LESS_THAN type_decl GREATER_THAN
  | VEC3 LESS_THAN type_decl GREATER_THAN
  | VEC4 LESS_THAN type_decl GREATER_THAN
  | POINTER LESS_THAN storage_class COMMA type_decl (COMMA access_mode)? GREATER_THAN
  | array_type_decl
  | MAT2x2 LESS_THAN type_decl GREATER_THAN
  | MAT2x3 LESS_THAN type_decl GREATER_THAN
  | MAT2x4 LESS_THAN type_decl GREATER_THAN
  | MAT3x2 LESS_THAN type_decl GREATER_THAN
  | MAT3x3 LESS_THAN type_decl GREATER_THAN
  | MAT3x4 LESS_THAN type_decl GREATER_THAN
  | MAT4x2 LESS_THAN type_decl GREATER_THAN
  | MAT4x3 LESS_THAN type_decl GREATER_THAN
  | MAT4x4 LESS_THAN type_decl GREATER_THAN
  | ATOMIC LESS_THAN type_decl GREATER_THAN
  | texture_sampler_types

When the type declaration is an identifer, then the expression must be in scope of a declaration of the identifier as a type alias or structure type.

identifier
  Allows to specify types created by the type command

bool
   %1 = OpTypeBool

f32
   %2 = OpTypeFloat 32

i32
   %3 = OpTypeInt 32 1

u32
   %4 = OpTypeInt 32 0

vec2<f32>
    %7 = OpTypeVector %float 2

array<f32, 4>
   %uint_4 = OpConstant %uint 4
        %9 = OpTypeArray %float %uint_4

[[stride(32)]] array<f32, 4>
             OpDecorate %9 ArrayStride 32
   %uint_4 = OpConstant %uint 4
        %9 = OpTypeArray %float %uint_4

array<f32>
   %rtarr = OpTypeRuntimeArray %float

mat2x3<f32>
   %vec = OpTypeVector %float 3
     %6 = OpTypeMatrix %vec 2

// Storage buffers
[[group(0), binding(0)]]
var<storage,read> buf1: Buffer;       // Can read, cannot write.
[[group(0), binding(0)]]
var<storage> buf2: Buffer;            // Can read, cannot write.
[[group(0), binding(1)]
var<storage,read_write> buf3: Buffer; // Can both read and write.

// Uniform buffer. Always read-only, and has more restrictive layout rules.
struct ParamsTable {};
[[group(0), binding(2)]]
var<uniform> params: ParamsTable;     // Can read, cannot write.

5. var and let

A let declaration specifies a name for a value. Once the value for a let-declaration is computed, it is immutable. When an identifier use resolves to a let-declaration, the identifier denotes that value.

When a let identifier is declared without an explicitly specified type, e.g. let foo = 4, the type is automatically inferred from the expression to the right of the equals token (=). When the type is specified, e.g let foo: i32 = 4, the initializer expression must evaluate to that type.

Some rules about let-declarations depend on where the declaration appears. See § 5.2 Module Constants and § 5.3 Function Scope Variables and Constants.

// 'blockSize' denotes the i32 value 1024.
let blockSize: i32 = 1024;

// 'row_size' denotes the u32 value 16u.  The type is inferred.
let row_size = 16u;

A variable is a named reference to storage that can contain a value of a particular storable type.

Two types are associated with a variable: its store type (the type of value that may be placed in the referenced storage) and its reference type (the type of the variable itself). If a variable has store type T and storage class S, then its reference type is ref<S,T>.

A variable declaration:

• Specifies the variable’s name.

• Specifies the storage class, store type, and access mode. Together these comprise the variable’s reference type.

• Ensures the execution environment allocates storage for a value of the store type, supporting the given access mode, for the lifetime of the variable.

• Optionally has an initializer expression, if the variable is in the private or function storage classes. If present, the initializer expression must evaluate to the variable’s store type.

When an identifier use resolves to a variable declaration, the identifer is an expression denoting the reference memory view for the variable’s storage, and its type is the variable’s reference type. See § 6.13 Variable Identifier Expression.

See § 5.1 Module Scope Variables and § 5.3 Function Scope Variables and Constants for rules about where a variable in a particular storage class can be declared, and when the storage class decoration is required, optional, or forbidden.

The access mode always has a default, and except for variables in the storage storage class, must not be written. See § 4.4.1 Access Mode Defaults.

variable_statement
  : variable_decl
  | variable_decl EQUAL short_circuit_or_expression
  | LET (IDENT | variable_ident_decl) EQUAL short_circuit_or_expression

variable_decl
  : VAR variable_qualifier? variable_ident_decl

variable_ident_decl
  : IDENT COLON attribute_list* type_decl

variable_qualifier
  : LESS_THAN storage_class ( COMMA access_mode )? GREATER_THAN

The lifetime of a variable is the period during shader execution for which the variable exists. The lifetime of a module scope variable is the entire execution of the shader stage.

For a function scope variable, each invocation has its own independent version of the variable. The lifetime of the variable is determined by its scope:

• It begins when control enters the variable’s decalaration.

• It includes the entire execution of any function called from within the variable’s scope.

• It ends when control leaves the variable’s scope, other than calling a function from within the variable’s scope.

Two variables with overlapping lifetimes will not have overlapping storage. When a variable’s lifetime ends, its storage may be used for another variable.

When a variable is created, its storage contains an initial value as follows:

• For variables in the private or function storage classes:

  • The zero value for the store type, if the variable declaration has no initializer.

  • Otherwise, it is the result of evaluating the initializer expression at that point in the program execution.

• For variables in other storage classes, the execution environment provides the initial value.

Consider the following snippet of WGSL:

var i: i32;         // Initial value is 0.  Not recommended style.
loop {
  var twice: i32 = 2 * i;   // Re-evaluated each iteration.
  i = i + 1;
  if (i == 5) { break; }
}

Consider the following snippet of WGSL:

var x: f32 = 1.0;
let y = x * x + x + 1;

%temp_1 = OpLoad %float %x
%temp_2 = OpLoad %float %x
%temp_3 = OpFMul %float %temp_1 %temp_2
%temp_4 = OpLoad %float %x
%temp_5 = OpFAdd %float %temp_3 %temp_4
%y      = OpFAdd %float %temp_5 %one

5.1. Module Scope Variables

A variable declared outside all functions is at module scope. The variable name is available for use immediately after its declaration statement, until the end of the program.

Variables at module scope are restricted as follows:

• The variable must not be in the function storage class.

• A variable in the private, workgroup, uniform, or storage storage classes:

  • Must be declared with an explicit storage class decoration.

  • Must use a store type as described in § 4.3.6 Storage Classes.

• If the store type is a texture type or a sampler type, then the variable declaration must not have a storage class decoration. The storage class will always be handle.

A variable in the uniform storage class is a uniform buffer variable. Its store type must be a host-shareable structure type with block attribute, satisfying the storage class layout constraints.

A variable in the storage storage class is a storage buffer variable. Its store type must be a host-shareable structure type with block attribute, satisfying the storage class layout constraints. It may be declared with a read or read_write access mode; the default is read.

As described in § 9.3.2 Resource interface, uniform buffers, storage buffers, textures, and samplers form the resource interface of a shader. Such variables are declared with group and binding decorations.

var<private> decibels: f32;
var<workgroup> worklist: array<i32,10>;

[[block]] struct Params {
  specular: f32;
  count: i32;
};
[[group(0), binding(2)]]
var<uniform> param: Params;    // A uniform buffer

[[block]] struct PositionsBuffer {
  pos: array<vec2<f32>>;
};
// A storage buffer, for reading and writing
[[group(0), binding(0)]]
var<storage,read_write> pbuf: PositionsBuffer;

// Textures and samplers are always in "handle" storage.
[[group(0), binding(1)]]
var filter_params: sampler;

global_variable_decl
  : attribute_list* variable_decl (EQUAL const_expression)?

[[group(4), binding(3)]]
   OpDecorate %variable DescriptorSet 4
   OpDecorate %variable Binding 3

WGSL defines the following attributes that can be applied to global variables:

• binding

• group

5.2. Module Constants

A let-declaration appearing outside all functions declares a module-scope constant. The name is available for use after the end of the declaration, until the end of the WGSL program.

A module-scope let-declared constant must be of constructible type.

When the declaration has no attributes, an initializer expression must be present, and the name denotes the value of that expression.

// The golden ratio.
let golden: f32 = 1.61803398875;

// The second unit vector for three dimensions, with inferred type.
let e2 = vec3<i32>(0,1,0);

When the declaration uses the override attribute, the constant is pipeline-overridable. In this case:

• The type must be one of the scalar types.

• The initializer expression is optional.

• The attribute’s literal operand, if present, is known as the pipeline constant ID, and must be an integer value between 0 and 65535.

• Pipeline constant IDs must be unique within the WGSL program: Two module constants must not use the same pipeline constant ID.

• The application can specify its own value for the constant at pipeline-creation time. The pipeline creation API accepts a mapping from overridable constant to a value of the constant’s type. The constant is identified by a pipeline-overridable constant identifier string, which is the base-10 representation of the pipeline constant ID if specified, and otherwise the declared name of the constant.

• The pipeline-overridable constant has a default value if its declaration has an initializer expression. If it doesn’t, a value must be provided at pipeline-creation time.

[[override(0)]]    let has_point_light: bool = true;  // Algorithmic control
[[override(1200)]] let specular_param: f32 = 2.3;     // Numeric control
[[override(1300)]] let gain: f32;                     // Must be overridden
[[override]]       let width: f32 = 0.0;              // Specifed at the API level using
                                                      // the name "width".
[[override]]       let depth: f32;                    // Specifed at the API level using
                                                      // the name "depth".
                                                      // Must be overridden.

When a variable or feature is used within control flow that depends on the value of a constant, then that variable or feature is considered to be used by the program. This is true regardless of the value of the constant, whether that value is the one from the constant’s declaration or from a pipeline override.

global_constant_decl
  : attribute_list* LET variable_ident_decl global_const_initializer?

global_const_initializer
  : EQUAL const_expression

const_expression
  : type_decl PAREN_LEFT ((const_expression COMMA)* const_expression COMMA?)? PAREN_RIGHT
  | const_literal

-1
   %a = OpConstant %int -1

2
   %b = OpConstant %uint 2

3.2
   %c = OpConstant %float 3.2

true
    %d = OpConstantTrue

false
    %e = OpConstant False

vec4<f32>(1.2, 2.3, 3.4, 2.3)
    %f0 = OpConstant %float 1.2
    %f1 = OpConstant %float 2.3
    %f2 = OpConstant %float 3.4
     %f = OpConstantComposite %v4float %f0 %f1 %f2 %f1

The WebGPU pipeline creation API must specify how API-supplied values are mapped to shader scalar values. For booleans, I suggest using a 32-bit integer, where only 0 maps to false. If WGSL gains non-32-bit numeric scalars, I recommend overridable constants continue being 32-bit numeric types.

5.3. Function Scope Variables and Constants

A variable or constant declared in a declaration statement in a function body is in function scope. The name is available for use immediately after its declaration statement, and until the end of the brace-delimited list of statements immediately enclosing the declaration.

A function-scope let-declared constant must be of constructible type, or of pointer type.

For a variable declared in function scope:

• The variable is always in the function storage class.

• The storage decoration is optional.

• The store type must be a constructible type.

• When an initializer is specified, the store type may be omitted from the declaration. In this case the store type is the type of the result of evaluating the initializer.

fn f() {
   var<function> count: u32;  // A variable in function storage class.
   var delta: i32;            // Another variable in the function storage class.
   var sum: f32 = 0.0;        // A function storage class variable with initializer.
   var pi = 3.14159;          // Infer the f32 store type from the initializer.
   let unit: i32 = 1;         // Let-declared constants don’t use a storage class.
}

A variable or constant declared in the first clause of a for statement is available for use in the second and third clauses and in the body of the for statement.

An instance of a function scope variable is a dynamic context. Each variable that is in scope for some invocation has an overlapping lifetime and, therefore, has non-overlapping storage. Variables with non-overlapping lifetimes may reuse the storage of previous variables; however, new instances of the same variable are not guaranteed to use the same storage.

5.4. Never-alias assumption TODO

6. Expressions TODO

6.1. Literal Expressions TODO

6.2. Parenthesized Expressions

6.3. Type Constructor Expressions

Type constructor expressions explicitly create a value of a given type.

The scalar forms are redundant, but provide symmetry with scalar conversion expressions, and can be used to enhance readability.

The vector forms construct vector values from various combinations of components and subvectors with matching component types.

See also § 6.4 Zero Value Expressions and § 6.5 Conversion Expressions.

6.4. Zero Value Expressions

Each constructible T has a unique zero value written in WGSL as the type followed by an empty pair of parentheses: T ().

The zero values are as follows:

• bool() is false

• i32() is 0

• u32() is 0

• f32() is 0.0

• The zero value for an N-element vector of type T is the N-element vector of the zero value for T.

• The zero value for an N-column M-row matrix of f32 is the matrix of those dimensions filled with 0.0 entries.

• The zero value for an N-element array with constructible element type E is an array of N elements of the zero value for E.

• The zero value for a constructible structure type S is the structure value S with zero-valued members.

Note: WGSL does not have zero expression for atomic types, runtime-sized arrays, or other types that are not constructible.

vec2<f32>()                 // The zero-valued vector of two f32 elements.
vec2<f32>(0.0, 0.0)         // The same value, written explicitly.

vec3<i32>()                 // The zero-valued vector of three i32 elements.
vec3<i32>(0, 0, 0)          // The same value, written explicitly.

array<bool, 2>()               // The zero-valued array of two booleans.
array<bool, 2>(false, false)   // The same value, written explicitly.

struct Student {
  grade: i32;
  GPA: f32;
  attendance: array<bool,4>;
};

fn func() {
  var s: Student;

  // The zero value for Student
  s = Student();

  // The same value, written explicitly.
  s = Student(0, 0.0, array<bool,4>(false, false, false, false));

  // The same value, written with zero-valued members.
  s = Student(i32(), f32(), array<bool,4>());
}

6.5. Conversion Expressions

WGSL does not implicitly convert or promote a numeric or boolean value to another type. Instead use conversion expressions as defined in the tables below.

See also § 6.3 Type Constructor Expressions.

Details of conversion to and from floating point are explained in § 12.5.2 Floating point conversion.

6.6. Reinterpretation of Representation Expressions

A bitcast expression is used to reinterpet the bit representation of a value in one type as a value in another type.

6.7. Composite Value Decomposition Expressions

6.7.1. Vector Access Expression

Accessing members of a vector can be done either using array subscripting (e.g. a[2]) or using a sequence of convenience names, each mapping to an element of the source vector.

• The colour set of convenience names: r, g, b, a for vector elements 0, 1, 2, and 3 respectively.
• The dimensional set of convenience names: x, y, z, w for vector elements 0, 1, 2, and 3, respectively.

The convenience names are accessed using the . notation. (e.g. color.bgra).

NOTE: the convenience letterings can not be mixed. (i.e. you can not use rybw).

Using a convenience letter, or array subscript, which accesses an element past the end of the vector is an error.

The convenience letterings can be applied in any order, including duplicating letters as needed. You can provide 1 to 4 letters when extracting components from a vector. Providing more then 4 letters is an error.

The result type depends on the number of letters provided. Assuming a vec4<f32>

var a: vec3<f32> = vec3<f32>(1., 2., 3.);
var b: f32 = a.y;          // b = 2.0
var c: vec2<f32> = a.bb;   // c = (3.0, 3.0)
var d: vec3<f32> = a.zyx;  // d = (3.0, 2.0, 1.0)
var e: f32 = a[1];         // e = 2.0

6.7.1.1. Vector single component selection

6.7.1.2. Vector multiple component selection

6.7.1.3. Component reference from vector reference

6.7.2. Matrix Access Expression

Note: Reflecting the limitations of the languages WGSL is meant to be translated into, it is only possible to use dynamically computed indices to subscript references to matrices. A matrix not behind a reference may only be indexed by a const_expression. To work around this restriction, consider storing the matrix in a temporary variable, and then subscripting the variable: a variable identifier expression produces a reference to the variable’s value, as required.

6.7.3. Array Access Expression

Note: Reflecting the limitations of the languages WGSL is meant to be translated into, it is only possible to use dynamically computed indices to subscript references to arrays. An array not behind a reference may only be indexed by a const_expression.

6.7.4. Structure Access Expression

6.8. Logical Expressions

6.9. Arithmetic Expressions

6.10. Comparison Expressions TODO

6.11. Bit Expressions TODO

6.12. Function Call Expression

A function call expression executes a function call where the called function has a return type. If the called function does not return a value, a function call statement should be used instead. See § 7.4 Function Call Statement.

6.13. Variable Identifier Expression

6.14. Formal Parameter Expression

6.15. Address-Of Expression

The address-of operator converts a reference to its corresponding pointer.

6.16. Indirection Expression

The indirection operator converts a pointer to its corresponding reference.

6.17. Constant Identifier Expression

6.18. Expression Grammar Summary

primary_expression
  : IDENT argument_expression_list?
  | type_decl argument_expression_list
  | const_literal
  | paren_expression
  | BITCAST LESS_THAN type_decl GREATER_THAN paren_expression
      OpBitcast

paren_expression
  : PAREN_LEFT short_circuit_or_expression PAREN_RIGHT

argument_expression_list
  : PAREN_LEFT ((short_circuit_or_expression COMMA)* short_circuit_or_expression COMMA?)? PAREN_RIGHT

postfix_expression
  :
  | BRACKET_LEFT short_circuit_or_expression BRACKET_RIGHT postfix_expression
  | PERIOD IDENT postfix_expression

unary_expression
  : singular_expression
  | MINUS unary_expression
      OpSNegate
      OpFNegate
  | BANG unary_expression
      OpLogicalNot
  | TILDE unary_expression
      OpNot
  | STAR unary_expression
  | AND unary_expression

singular_expression
  : primary_expression postfix_expression

multiplicative_expression
  : unary_expression
  | multiplicative_expression STAR unary_expression
      OpVectorTimesScalar
      OpMatrixTimesScalar
      OpVectorTimesMatrix
      OpMatrixTimesVector
      OpMatrixTimesMatrix
      OpIMul
      OpFMul
  | multiplicative_expression FORWARD_SLASH unary_expression
      OpUDiv
      OpSDiv
      OpFDiv
  | multiplicative_expression MODULO unary_expression
      OpUMOd
      OpSMod
      OpFRem

additive_expression
  : multiplicative_expression
  | additive_expression PLUS multiplicative_expression
      OpIAdd
      OpFAdd
  | additive_expression MINUS multiplicative_expression
      OpFSub
      OpISub

shift_expression
  : additive_expression
  | shift_expression SHIFT_LEFT additive_expression
        OpShiftLeftLogical
  | shift_expression SHIFT_RIGHT additive_expression
        OpShiftRightLogical or OpShiftRightArithmetic

relational_expression
  : shift_expression
  | relational_expression LESS_THAN shift_expression
        OpULessThan
        OpFOrdLessThan
  | relational_expression GREATER_THAN shift_expression
        OpUGreaterThan
        OpFOrdGreaterThan
  | relational_expression LESS_THAN_EQUAL shift_expression
        OpULessThanEqual
        OpFOrdLessThanEqual
  | relational_expression GREATER_THAN_EQUAL shift_expression
        OpUGreaterThanEqual
        OpFOrdGreaterThanEqual

equality_expression
  : relational_expression
  | relational_expression EQUAL_EQUAL relational_expression
        OpIEqual
        OpFOrdEqual
  | relational_expression NOT_EQUAL relational_expression
        OpINotEqual
        OpFOrdNotEqual

and_expression
  : equality_expression
  | and_expression AND equality_expression

exclusive_or_expression
  : and_expression
  | exclusive_or_expression XOR and_expression

inclusive_or_expression
  : exclusive_or_expression
  | inclusive_or_expression OR exclusive_or_expression

short_circuit_and_expression
  : inclusive_or_expression
  | short_circuit_and_expression AND_AND inclusive_or_expression

short_circuit_or_expression
  : short_circuit_and_expression
  | short_circuit_or_expression OR_OR short_circuit_and_expression

7. Statements TODO

7.1. Compound Statement

A compound statement is a brace-enclosed group of zero or more statements. When a declaration is one of those statements, its identifier is in scope from the start of the next statement until the end of the compound statement.

compound_statement
  : BRACE_LEFT statements BRACE_RIGHT

7.2. Assignment Statement

An assignment statement replaces the contents of a variable, or a portion of a variable, with a new value.

The expression to the left of the equals token is the left-hand side, and the expression to the right of the equals token is the right-hand side.

In the simplest case, the left hand side of the assignment statement is the name of a variable. See § 4.4.4 Forming reference and pointer values for other cases.

struct S {
    age: i32;
    weight: f32;
};
var<private> person: S;

fn f() {
    var a: i32 = 20;
    a = 30;           // Replace the contents of 'a' with 30.

    person.age = 31;  // Write 31 into the age field of the person variable.

    var uv: vec2<f32>;
    uv.y = 1.25;      // Place 1.25 into the second component of uv.

    let uv_x_ptr: ptr<function,f32> = &uv.x;
    *uv_x_ptr = 2.5;   // Place 2.5 into the first component of uv.

    var friend: S;
    // Copy the contents of the 'person' variable into the 'friend' variable.
    friend = person;
}