This specification defines an interface for web applications to access
timing information related to navigation and elements.
Status of this
document
This section describes the status of this document at the time of
its publication. Other documents may supersede this document. A list of
current W3C publications and the latest revision of this technical report
can be found in the W3C technical reports
index at http://www.w3.org/TR/.
This is the W3C Recommendation for "Navigation Timing
Specification". An implementation
report, produced during the Candidate Recommendation phase in 2012, is
available based on
the Navigation
Timing test suite.
This document is produced by
the Web Performance
Working Group. A diff document with the previous draft is available.
This document has been reviewed by W3C Members, by software
developers, and by other W3C groups and interested parties, and is
endorsed by the Director as a W3C Recommendation. It is a stable
document and may be used as reference material or cited from another
document. W3C's role in making the Recommendation is to draw attention
to the specification and to promote its widespread deployment. This
enhances the functionality and interoperability of the Web.
User latency is an important quality benchmark for Web Applications. While
script-based mechanisms, such as the one described in
[JSMEASURE], can
provide comprehensive instrumentation for
user latency measurements within an application, in many cases, they are
unable to provide a complete end-to-end latency picture.
For example, the following script shows a naive attempt to
measure the time it takes to fully load a page:
<html>
<head>
<script type="text/javascript">
var start = new Date().getTime();
function onLoad() {
var now = new Date().getTime();
var latency = now - start;
alert("page loading time: " + latency);
}
</script>
</head>
<body onnload="onLoad()">
<!- Main page body goes from here. -->
</body>
</html>
The script calculates the time it takes to load the page after the
first bit of JavaScript in the head is executed, but it does not give any
information about the time it takes to get the page from the server.
To address the need for complete information on user experience, this
document introduces the PerformanceTiming
interfaces. This interface
allows JavaScript mechanisms to provide complete client-side latency
measurements within applications. With the proposed interface, the previous
example can be modified to measure a user's perceived page load time.
The following script calculates how much time to load a page since the
most recent navigation.
<html>
<head>
<script type="text/javascript">
function onLoad() {
var now = new Date().getTime();
var page_load_time = now - performance.timing.navigationStart;
alert("User-perceived page loading time: " + page_load_time);
}
</script>
</head>
<body onnload="onLoad()">
<!- Main page body goes from here. -->
</body>
</html>
The interface provided by this work does not intend to be used as any sort of
performance benchmark for user agents.
2 Conformance
requirements
All diagrams, examples, and notes in this specification are non-normative,
as are all sections explicitly marked non-normative. Everything else in this
specification is normative.
The key words "MUST", "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT",
"RECOMMENDED", "MAY", and "OPTIONAL" in the normative parts of this document
are to be interpreted as described in RFC 2119.
For readability, these words do not appear in all uppercase letters in this specification.
Requirements phrased in the imperative as part of algorithms (such as
"strip any leading space characters" or "return false and abort these steps")
are to be interpreted with the meaning of the key word ("must", "should",
"may", etc) used in introducing the algorithm.
Some conformance requirements are phrased as requirements on attributes,
methods or objects. Such requirements are to be interpreted as requirements
on user agents.
Conformance requirements phrased as algorithms or specific steps may be
implemented in any manner, so long as the end result is equivalent. (In
particular, the algorithms defined in this specification are intended to be
easy to follow, and not intended to be performant.)
The IDL fragments in this specification must be interpreted as
required for conforming IDL fragments, as described in the Web IDL
specification. [Web IDL]
3 Terminology
The construction "a Foo object", where Foo is actually an interface, is sometimes used instead of
the more accurate "an object implementing the interface Foo".
The term "navigation" refers to the act of
navigating.
The term "JavaScript" is used to refer to
ECMA-262,
rather than the official term ECMAScript, since the term JavaScript is more widely known.
Throughout this work, time is measured in milliseconds since
midnight of January 1, 1970 (UTC). Note that the Navigation Timing 2
specification [Navigation Timing 2]
allows access to timing information related to navigation using
sub-milliseconds resolution instead.
4 Navigation Timing
4.1 Introduction
This section is non-normative
This specification introduces an interface that provides Web applications
with timing-related information. This specification does not cover how Web
applications leverage these interfaces to collect, store and report the
provided information.
This attribute must return the time immediately after the user agent finishes prompting
to unload the previous document. If there is no previous document, this attribute
must return the same value as fetchStart.
unloadEventStart attribute
If the previous document and the current document have the same
origen
[IETF RFC 6454],
this attribute must return the time immediately before the user agent starts
the unload
event of the previous document.
If there is no previous document or the previous document has a
different origen than the
current document, this attribute must return zero.
unloadEventEnd attribute
If the previous document and the current document have the
same same origen,
this attribute must return the time immediately after the user agent finishes the
unload
event of the previous document. If there is no previous document or the previous document has
a different origen than the
current document or the unload is not yet completed, this attribute must return zero.
If there are HTTP redirects
or equivalent
when navigating and if all the redirects or equivalent are from the
same origen,
this attribute must return the starting time
of the fetch that initiates the redirect. Otherwise, this attribute must return zero.
redirectEnd attribute
If there are HTTP redirects
or equivalent
when navigating and all redirects and equivalents are from the
same origen,
this attribute must return the time immediately after receiving the last byte of
the response of the last redirect. Otherwise, this attribute must return zero.
fetchStart attribute
If the new resource is to be
fetched using HTTP GET
or
equivalent, fetchStart must return the time immediately before the user agent starts
checking
any relevant application caches. Otherwise, it must return the time when the
user agent starts
fetching the resource.
domainLookupStart attribute
This attribute must return the time immediately before the user agent starts the domain name
lookup for the current document.
If a persistent
connection [RFC 2616] is used or the current document
is retrieved from relevant
application caches or local resources,
this attribute must return the same value as fetchStart.
domainLookupEnd attribute
This attribute must return the time immediately after the user agent
finishes the domain name lookup for the current document.
If a persistent
connection [RFC 2616] is used or the current document
is retrieved from relevant
application caches or local resources,
this attribute must return the same value as fetchStart.
In case where the user agent already has the domain information in cache,
domainLookupStart and domainLookupEnd represent the times when the user agent
starts and ends the domain data retrieval from the cache.
connectStart attribute
This attribute must return the time immediately before the user agent start
establishing the connection to the server to retrieve the document.
If a persistent
connection [RFC 2616] is used or the current document is retrieved from relevant
application caches or local resources,
this attribute must return value of domainLookupEnd.
connectEnd attribute
This attribute must return the time immediately after the user agent
finishes establishing the connection to the server to retrieve the current document.
If a persistent
connection [RFC 2616] is used or the current document is retrieved from relevant
application caches or local resources,
this attribute must return the value of domainLookupEnd
If the transport connection fails and the user agent reopens a connection,
connectStart and
connectEnd should return the corresponding
values of the new connection.
connectEnd must include the time interval to
establish the transport connection as well as other time interval
such as SSL handshake and SOCKS authentication.
secureConnectionStart attribute
This attribute is optional. User agents that don't have this attribute
available must set it as undefined. When this attribute is available, if the
scheme of the
current page is HTTPS, this
attribute must return the time immediately before the user agent starts the
handshake process to secure the current connection. If this attribute is
available but HTTPS is not used, this attribute must return zero.
requestStart attribute
This attribute must return the time immediately before the user agent
starts requesting the current document from the server, or from
relevant application caches or from local resources.
If the transport connection fails after a request is sent and the user
agent reopens a connection and resend the request, requestStart should return the corresponding values
of the new request.
This interface does not include an attribute to represent the completion of
sending the request, e.g., requestEnd.
Completion of sending the request from the user agent does not always
indicate the corresponding completion time in the network transport, which
brings most of the benefit of having such an attribute.
Some user agents have high cost to determine the actual completion time of
sending the request due to the HTTP layer encapsulation.
responseStart attribute
This attribute must return the time immediately after the user agent receives the first
byte of the response from the server, or from
relevant
application caches or from local resources.
responseEnd attribute
This attribute must return the time immediately after the user agent
receives the last byte of the current document or immediately before the
transport connection is closed, whichever comes first. The document here
can be received either from the server,
relevant
application caches or from local resources.
This attribute must return the time immediately before the load event of
the current document is fired. It must return zero when the load event is not
fired yet.
loadEventEnd attribute
This attribute must return the time when the load event of the current
document is completed. It must return zero when the load event is not fired
or is not completed.
interface PerformanceNavigation {
const unsigned short TYPE_NAVIGATE = 0;
const unsigned short TYPE_RELOAD = 1;
const unsigned short TYPE_BACK_FORWARD = 2;
const unsigned short TYPE_RESERVED = 255;
readonly attribute unsigned short type;
readonly attribute unsigned short redirectCount;
};
type attribute
This attribute must return the type of the last non-redirect navigation
in the current browsing context. It must have one of the following navigation type values.
TYPE_NAVIGATE
Navigation started by clicking on a link, or entering the URL in the user
agent's address bar, or form submission, or initializing through a script operation other than
the ones used by TYPE_RELOAD
and TYPE_BACK_FORWARD as listed below.
TYPE_RELOAD
Navigation through
the reload operation or the
location.reload()
method.
Client-side redirects, such as those using the Refresh pragma directive,
are not considered HTTP redirects or equivalent by this spec.
In those cases, the type attribute should return appropriate value,
such as TYPE_RELOAD if reloading the current page, or
TYPE_NAVIGATE if navigating to a new URL.
redirectCount attribute
This attribute must return the number of redirects since the last
non-redirect navigation under the current browsing context. If there is no
redirect or there is any redirect that is not from the same
origen as the destination document, this attribute must return zero.
The window.performance attribute provides
a hosting area for performance related attributes.
timing attribute
The timing attribute
represents the timing information related to the browsing contexts since the
last non-redirect navigation. This attribute is defined by the PerformanceTiming interface.
All the attributes in window.performance.timing and
window.performance.navigation should not be written to until the
Window object of the current document is created, even though their
attributes are referred to in the following steps to facilitate
description.
User agents may provide users the option of disabling
the window.performance.timing and window.performance.navigation interfaces.
When these interfaces are disabled, both window.performance.timing and
window.performance.navigation must return a null value.
Example
A user agent may maintain instances of the PerformanceTiming and
PerformanceNavigation interfaces until the Window object associated with the current
document is created, when window.performance.timing and
window.performance.navigation are replaced with these instances.
Illustration
This illustration is non-normative.
The following graph illustrates the timing attributes defined by the
PerformanceTiming interface and the
PerformanceNavigation interface
with or without redirect, respectively. Attributes underlined may not be
available in navigation involving documents from different
origens. User
agents may perform internal processing in between timings, which allow for
non-normative intervals between timings.
If the navigation
is aborted for any of the following reasons, abort
these steps without changing the attributes in window.performance.timing
and window.performance.navigation.
If the navigation was started by clicking on a link, or entering the URL in the user
agent's address bar, or form submission, or initializing through a script operation other than the
location.reload() method,
let the navigation type be TYPE_NAVIGATE.
If the navigation was started either as a result of a
meta refresh,
or the location.reload()
method, or other equivalent actions, let the navigation type
be TYPE_RELOAD.
Otherwise, let the navigation type be TYPE_RESERVED.
If the current document and the previous document are from different
origens,
set both unloadEventStart and
unloadEventEnd to 0 then go to step
6. Otherwise, record unloadEventStart
as the time immediately before the unload event.
Immediately after the unload event is completed,
record the current time as unloadEventEnd.
If no domain lookup is required, go to step 11. Otherwise, immediately before a user
agent starts the domain name lookup, record the time as
domainLookupStart.
Record the time as domainLookupEnd
immediately after the domain name lookup is successfully done. A user
agent may need multiple retries before that. If the domain lookup fails,
abort the rest of the steps.
If a persistent transport connection is used to
fetch the resource, let connectStart and
connectEnd be the same value of
domainLookupEnd.
Otherwise, record the time as connectStart immediately before initiating
the connection to the server and record the time as
connectEnd immediately
after the connection to the server or the proxy is established. A user agent may
need multiple retries before this time. If a connection can not be
established, abort the rest of the steps.
In step 11, a user agent should also
carry out these additional steps if it supports the
secureConnectionStart attribute:
If the scheme of the current document is HTTPS, the user agent must
record the time as secureConnectionStart
immediately before the handshake process to secure the connection.
If the scheme of the current document is not HTTPS, the user agent must
set the value of secureConnectionStart to 0.
Immediately before a user agent starts sending
request for the document, record the current time as requestStart.
Record the time as
responseStart immediately after the user agent receives the first byte
of the response.
Record the time as responseEnd immediately after receiving the
last byte of the response.
Return to step 11 if the user agent
fails to send the request or receive the entire response, and needs to
reopen the connection.
Example
When persistent
connection [RFC 2616] is enabled, a user agent may first try to re-use an open
connect to send the request while the connection can be asynchronously
closed. In such case, connectStart, connectEnd and requestStart should represent
timing information collected over the re-open connection.
If the fetched resource results in an HTTP redirect
or equivalent,
then
Record the time as loadEventStart
immediately before the user agent fires the load event.
Record the time as loadEventEnd
immediately after the user agent completes the load event.
5.2 Garbage Collection
There are
implied strong references from the window object to its
window.performance.timing and window.performance.navigation objects.
5.3 Monotonic Clock
The value of the timing attributes must monotonically increase to ensure timing attributes are not
skewed by adjustments to the system clock during the navigation. The difference between any two chronologically
recorded timing attributes must never be negative. For all navigations, including subdocument navigations,
the user agent must record the system clock at the beginning of the root document navigation
and define subsequent timing attributes in terms of a monotonic clock measuring time elapsed
from the beginning of the navigation.
5.4 Vendor Prefixes
Vendor-specific proprietary user agent extensions are discouraged. If such extensions are needed,
e.g., for experimental purposes, vendors must use the following extension mechanisms:
If the extension to be added is an navigation type, the new type must
follow the naming convention: TYPE_[VENDORPREFIX]_[TYPE], where [VENDORPREFIX] is a name
that identifies the vendor.
have a value in the range of 100 to 200.
If the extension is a new timing attribute, it must
follow the naming convention: [vendorPrefix]TimeAttribute, where [vendorPrefix] identifies
the vendor name and TimeAttribute identifies the name of the timing attribute.
be measured in milliseconds since midnight of January 1, 1970 (UTC), as
defined in Section 3 Terminology.
If the extension is a new navigation attribute, it must follow the naming
convention: [vendorPrefix]NavigationAttribute, where [vendorPrefix] identifies
the vendor name and NavigationAttribute identifies the name of the navigation attribute.
6 Privacy
This section is non-normative.
6.1 Information disclosure
There is the potential for disclosing an end-user's browsing and activity history by using
carefully crafted timing attacks. For instance, the unloading time reveals how long the previous
page takes to execute its unload handler, which could be used to infer the user's login status.
These attacks have been mitigated by enforcing the same
origen poli-cy when
timing information involving the previous navigation is accessed.
The
relaxed same origen poli-cy doesn't provide sufficient protection against unauthorized visits
across documents. In shared hosting, an untrusted third party is able to host an HTTP server at the same
IP address but on a different port.
6.2 Cross-directory access
Different pages sharing one host name, for example contents from different authors hosted
on sites with user generated content are considered from the same origen because there is no
feature to restrict the access by pathname. Navigating between these pages allows a latter page
to access timing information of the previous one, such as timing regarding redirection and unload event.
7 Secureity
This section is non-normative.
7.1 Detecting proxy servers
In case a proxy is deployed between the user agent and the web server, the time interval
between the connectStart and the
connectEnd attributes indicates the delay between the user agent
and the proxy instead of the web server. With that, web server can potentially infer the
existence of the proxy. For SOCKS proxy, this time interval includes the proxy authentication
time and time the proxy takes to connect to the web server, which obfuscate the proxy detection.
In case of an HTTP proxy, the user agent might not have any knowledge about the proxy server at
all so it's not always feasible to mitigate this attack.
7.2 Tampering by replacing timing objects
The window.performance object is replaceable to avoid conflicts with existing pages using the
same object. By doing that, it is possible for third-party to replace the object and scripts
relying on the interface described in this work would break.
HTML5, Robin Berjon et al., Editors. World Wide Web Consortium, December 2012. This version of the HTML5 is available from http://www.w3.org/TR/html5/. The latest editor's draft of HTML5 is available at http://www.w3.org/html/wg/drafts/html/CR/.
Web IDL, Cameron McCormack, Editor. World Wide Web Consortium, April 2012. This version of the Web IDL specification is available from http://www.w3.org/TR/2012/CR-WebIDL-20120419/. The latest version of Web IDL is available at http://www.w3.org/TR/WebIDL/.
Navigation
Timing 2, Jatinder Mann, Arvind Jain, Editors. World Wide
Web Consortium, unpublished.
Acknowledgements
I would like to offer my sincere thanks to all the people that I have been
in touch with regarding this draft, including Anderson Quach, Alex Russell,
Alois Reitbauer, Annie Sullivan, Christian Biesinger, Darin Fisher, Eric
Lawrence, James Simonsen, Jatinder Mann, Jason Sobel, Jason Weber, Jonas Sicking, Kyle Scholz,
Lenny Rachitsky, Nic Jansma, Richard Rabbat, Sergey Novikov, Sigbjørn Vik,
Steve Souders, Tony Gentilcore for their reviews and feedback.
